Roland JP-8080 - Chapter 5. Producing Arpeggios When Chords are Played (Arpeggiator)

7
(1)Turn the power on while holding down
[LFO1 WAVEFORM], [NUMBER 1] and [NUMBER 3].
(2)The version number appears on the display.
(3)After checking the number, turn the power off.
You can save the user data to a memory card (SmartMedia).
Before perform the data saving, you must format a SmartMedia
by using the following procedure.
◆ Format a SmartMedia
(1)Insert a 2M or 4M SmartMedia (5V type) into the card slot
in state of power off.
(2)Turn the power on.
(3)Press [EDIT].
(4)Press [INIT/UTIL]([BANK 7]) several times to select the
display of Card.
(5)Press [DEC] or [INC] several times to select "FORMAT".
(6)Press [WRITE]. The following display of confirmation
appears on the LCD.
(7)Press [WRITE]. The format operation will be carried out.
(8)When formatting ends, "Completed" appears on the LCD.
◆ Saving the user data
(1)Insert a formatted SmartMedia (5V type) into the card slot
in state of power off.
(2)Turn the power on.
(3)Press [EDIT].
(4)Press [INIT/UTIL]([BANK 7]) several times to select the
display of Card.
(5)Press [DEC] or [INC] several times to select "USER-
>CARD"
(6)Press [WRITE].
(7)Press [DEC] or [INC] several times to select "ALL".
(8)Press [WRITE]. The following display of confirmation
appears on the LCD.
(9)Press [WRITE]. The saving the user data operation will be
carried out.
(10)When saving all user data ends, "Completed" appears on
the LCD.
◆ Loading the user data
(1)Insert the SmartMedia which is the data backed up in the
"Saving the user data" procedure into the card slot in state
of power off.
(2)Turn the power on.
(3)Press [EDIT].
(4)Press [INIT/UTIL]([BANK 7]) several times to select the
display of Card.
(5)Press [DEC] or [INC] several times to select "CARD-
>USER"
(6)Press [WRITE].
(7)Press [DEC] or [INC] several times to select "ALL".
(8)Press [WRITE]. The following display of confirmation
appears on the LCD.
(9)Press [WRITE]. The loading the user data operation will be
carried out.
(10)When loading all user data ends, "Completed" appears
on the LCD.
Jul, 1998
SAVING AND LOADING THE USER DATA
Card [WRITE]
Menu: FORMAT
Format CARD
OK? [WRITE/EXIT]
Formatting
65% oooooo... .
Card [WRITE]
Menu: USER->CARD
Type: [WRITE]
ALL
Overwrite CARD
OK? [WRITE/EXIT]
Card [WRITE]
Menu: CARD->USER
Type: [WRITE]
ALL
Overwrite USER
OK? [WRITE/EXIT ]
IDENTIFYING THE VERSION NUMBER
JP-8080