Need help?Do you have a question about the Roland JU-06A and is the answer not in the manual?
General| Display type | LED |
|---|---|
| Built-in display | Yes |
| Apple docking | No |
| USB connector type | Micro-USB B |
| Current | 0.5 A |
| Power supply type | DC / Battery |
| Mixer section | - |
| Product color | Black |
Weight and Dimensions| Depth | 128 mm |
|---|---|
| Width | 300 mm |
| Height | 49 mm |
| Weight | 995 g |
Advice on handling, power sources, and battery life for the JU-06A.
Notes on using the JU-06A with the K-25m keyboard and DK-01 dock.
Information on playing the JU-06A via MIDI or USB connections.
Explanation of the HOLD, CHORD, and NOTE buttons for keyboard functions.
Details on ON/OFF, MODE, RANGE, and RATE controls for the arpeggiator.
Description of the RATE and DELAY TIME sliders for LFO modulation.
Parameters for waveform selection, pitch, and pulse width modulation.
Settings for the High-Pass Filter (HPF) and Voltage Controlled Filter (VCF).
Controls for the Voltage Controlled Amplifier (VCA) and Envelope generator.
Controls for patch selection, bank management, and tempo.
Information on the Micro USB port and the power switch.
Details on output, input, headphone, and MIDI connections.
Instructions for powering on the unit and essential handling precautions.
How to use the step buttons as a virtual keyboard.
Explanation of SOLO, UNISON, and POLY modes for keyboard playing.
Guide to controlling the arpeggiator's modes, range, and rate.
Clarification of the terms 'Arpeggio' versus 'Arpeggiator'.
Instructions on how to use the Chord Memory function.
Steps for editing chord notes and octave settings.
Introduction to patterns, limitations, and MIDI clock synchronization.
Managing pattern playback, selection, and tempo adjustment.
Controlling the playback of individual steps in a pattern.
Entering notes with automatic step advancement.
Selecting and entering note numbers and gate times for steps.
Procedure for adding ties between sequence steps.
Instructions for saving patch and chord memory data.
Procedure for saving sequencer patterns.
Using numeric buttons for pattern editing.
Settings for portamento time and pitch bend range.
Configuration for tempo sync, LFO waveform, and key trigger.
Adjusting the volume and time of the delay effect.
Adjusting the amount of feedback (repeats) for the delay.
Settings for shuffle, step order, and off step mode.
Configuration for last step and note scale.
Master tuning adjustment and MIDI channel settings.
Settings for MIDI clock source and pitch transposition.
How the sound engine responds to keyboard velocity.
Keyboard touch sensitivity and automatic power-off settings.
Configuration for LED demo timing and polyphony chain mode.
Settings for chorus noise amount and MIDI output destination.
Procedure for resetting the unit to its factory default state.
Instructions for backing up and restoring unit data.
Enabling the unit to operate solely on battery power.
Using the JU-06A as a control surface without sound output.
Specifications including polyphony, power, dimensions, and weight.
List of included accessories and available optional items.
To Next Page
