Roland JU-06A User Manual

8 ENV%
Here you can create time-varying change (envelope). !
CONTROLLER ## EXPLANATION!
[A] slider# # Attack time!
[D] slider# # Decay Time!
[S] slider# # Sustain time!
[R] slider# # Release time!
9 SEQUENCER !
CONTROLLER ## EXPLANATION!
[START] button ## Makes the sequencer play (lit) or stop (unlit).!
[EDIT] button # # Lets you edit the step sequencer.%
[NOTE/GATE] switch # Switches the target of editing (note number or gate time).!
[VALUE] knob # # Use this to edit values. !
10 COMMON SECTION%
Here you can switch the sound (patch/bank). !
CONTROLLER ## EXPLANATION!
Display## # Shows the bank number and patch number.%
# # # During patch editing, a decimal point “ . ” is shown at the right of !
# # # the patch number.%
# # # If the SEQUENCER [EDIT] button is lit, this shows the tempo or !
# # # the sequencer value that you’re editing. !
BANK [1(5)]-[4(8)] # What is “Patch/Bank”? !
buttons## # Here you can save or recall 64 sounds taken from the JUNO-60 (8 patches × 8!
PATCH [1]-[8] buttons# banks) and another 64 sounds taken from the JUNO-106.!
###!
###To switch the bank/patch
# # # 1. Press the BANK [1 (5)]–[4 (8)] buttons to switch the bank. Each time you !
# # # press the same bank button, you alternate between banks 1–4 and 5–8.!
%
# # # To select banks 5–8, you can also hold down the bank (5–8) that you want to !

Roland JU-06A Specifications

General

Display type	LED
Built-in display	Yes
Apple docking	No
USB connector type	Micro-USB B
Current	0.5 A
Power supply type	DC / Battery
Mixer section	-
Product color	Black

Weight and Dimensions

Depth	128 mm
Width	300 mm
Height	49 mm
Weight	995 g