Roland JU-06A - DELAY PARAMETERS; Delay Level and Time; Delay Feedback

DELAY PARAMETERS
1. Press the SEQUENCER [EDIT] button to make it go dark.!
2. Hold down the [DELAY (15)] button and select a parameter by pressing one of the numeric !
buttons shown in the following table.!
%
3. Use the [VALUE] knob to edit the value.!
%
4. Press the [DELAY (15)] button once again to exit delay parameter editing. !
BUTTON PARAMETER # VALUE/EXPLANATION!
[1]# Delay Level# # Adjusts the volume of the delay sound.!
# # # # 0-15!
[2]# Delay Time# # Adjusts the time by which the sound is delayed.!
# # # # 0-15!
[3]# Delay Feedback# Adjusts the amount of feedback (delay repeats).!
# # # # 0-15!
# # # # # # # # * Saved as a patch setting. !