###select and then press another bank button to select it. %
# # # 2. Press the PATCH [1]–[8] buttons to switch the patch. %
###To store the patch !
# # # * When you edit a patch, a dot appears in the display. 1-1. !
###!
# # # 1. Press the save-destination BANK [1 (5)]–[4 (8)] button. Each time you press !
# # # the same bank button, you alternate between banks 1–4 and 5–8.%
# # # To select banks 5–8, you can also hold down the bank (5–8) that you want to !
###select and then press another bank button to select it. %
# # # 2. Long-press the save-destination PATCH [1]–[8] button. %
[CHORUS I] button# Turns the chorus effect- I/II On/Off. !
[CHORUS II] button!
[DELAY] button# # Turns the delay effect On/Off.%
[MANUAL] button# Causes sound to be produced according to the current settings of the sliders. !
[60/106] switch# # Switches between JUNO-60 sounds and JUNO-106 sounds.%
EXT CLK IN jack# Inputs a clock signal from an external device. You can make the sequencer’s !
# # # steps advance in synchronization with the clock (pulse) that is input. !
To Next Page
Loading...
Need help?
General
Weight and Dimensions
