Juno Di System Update Version 1.12
This system program updates your JUNO-Di to the latest version 1.12.
How to tell the version
Please check the version of the system working on your JUNO-Di before
downloading the archive file.
1. Press the [ MENU ] button. The "MENU" screen will appear.
2. Use the cursor buttons to select "VERSION INFO," and press the [ ENTER ]
button. The "Version Info" screen will appear, displaying the software version.
* If this shows the latest version (Version 1.12 or later), there's no need to update
your JUNO-Di.
Update history
[ Ver.1.12 ]
● [ Functionality Improvements ]
○ Improved the Patch Remain function.
If you turn on the Patch Remain function, the currently-playing notes
will no longer be interrupted when you switch sounds (Patches or
Performances).
For more information, refer to "About the Patch Remain Function ( JUNO-
Di_l_Remain_e01_W.pdf )."
[ Ver.1.10 ]
● [ Additional Functions ]
○ Available for Roland Wireless Connect ( WNA1100-RL ).
For more information, refer to "About the Wireless LAN Function ( JUNO-
Di_l_wireless_e02_W.pdf )."
[ Ver.1.03 ]
● [ Bug Fixes ]
The following bugs were fixed.
○ Shortly after start up, the JUNO-Di doesn't perform by the setting value
of the "Keyboard Velocity Sens." It does by the initial value ( Sens=0 ) in
fact.
● [ Functionality Improvements ]
○ The Bank Select and Program Change messages of the MIDI Ch.10 were
output on start up. It changed to which the messages do not output.
© 2012 Roland Corp. U.S.
To Next Page
