Roland M-120 User Manual

Covers essential safety guidelines for operating electrical products, including handling, environment, and user care.

Details critical warnings regarding electric shock, user-serviceable parts, and proper grounding procedures.

Highlights the M-120's capabilities, including 12 channels, low-noise design, professional sound quality, and connectivity options.

Advises on safe power connection, avoiding certain environments, and preventing hum from nearby equipment.

Provides instructions for cleaning, avoiding damaging chemicals, protecting from impact, and servicing.

Explains how signals enter, pass through channel volume, and are split to Master and Effect sections.

Details how signals are mixed, adjusted, and sent to Master Out, Effect Send, and Monitor Out.

Describes the purpose and operation of each knob, switch, and jack on the M-120's front panel.

Details the types and functions of all input and output jacks and connectors on the rear panel.

Guides users through the initial steps of powering on the unit and connected equipment.

Explains how to connect and set up electronic instruments for basic audio mixing.

Details the process of balancing and adjusting channel volumes for instrument mixing.

Provides instructions for integrating external effects devices into the mixing setup.

Explains how to set up monitoring systems and adjust monitor levels for playback.

Lists input socket types, sensitivity, impedance, and recommended source impedance.

Details output socket types, rated levels, impedance, and connector types.