MC-101 Update – Functions Added in Ver.1.30
8
Auto Channel Function Added
Now you can use the Auto Channel function.
Incoming MIDI messages are sent to the track selected by the TRACK
SEL [1]–[4] buttons.
This is convenient when a MIDI keyboard etc. is connected.
The following item is added to the system settings (MIDI tab).
Parameter Value Explanation
MIDI Rx Auto
Channel
OFF, CH1, CH2,
CH3…CH16
If there is input on the specied MIDI channel,
those MIDI messages are sent to the track
selected by the TRACK SEL [1]–[4] buttons.
Added Shortcuts
Action Operation
Duplicating a
Measure
In tone or drum track, hold down the [SEQ] button and press the
MEASURE [>] button.
Copy selected step
Paste to selected
step
In the NOTE EDIT screen of tone track, hold down the [SHIFT] button
and press the [FX] button to copy.
Repeat to paste.
Enter a SubStep in
the drum track
In drum track, hold down the [SEQ] button and press a pad [1]–[16].
Switching KnobTrk
setting
Press the [SOUND], [FILTER], [FX], and [MOD] buttons simultaneously.
Problems Fixed
5
We improved the number of voices used when using samples in a drum
track.
5
We xed the problem that had caused hangups when the [FX PRM] knob
and [FX DEPTH] knob were operated while switching MFX in TOTAL MFX.
5
We xed the problem that had caused the MFX parameter assigned to
the knob to not change correctly when using the [VALUE] dial to change
the MFX Type.
5
We xed the problem that had caused freezing when a damaged WAV le
was imported.
5
We xed the problem that caused the unit to freeze when exiting storage
mode.
5
We xed the problem that user samples were read 1 sample shorter after
imported.
To Next Page
Loading...
Need help?
General
