Do you have a question about the Roland Groovebox MC-707 and is the answer not in the manual?
Product color | Black |
---|---|
USB direct playback | - |
Built-in optical drive | No |
USB port | Yes |
USB connector type | USB Type-B |
USB ports quantity | 1 |
Compatible memory cards | SD, SDHC |
Display type | LCD |
Display resolution | 256 x 80 pixels |
Current | 2 A |
Power supply type | AC |
Depth | 263 mm |
---|---|
Width | 426 mm |
Height | 60 mm |
Weight | 2100 g |
Describes the function of buttons, knobs, and displays on the top panel.
Details on pad modes, common section 2 controls, and total effects section.
Explains all rear panel I/O ports for connectivity.
Instructions for safely turning the MC-707 on and off.
Explains fundamental data structures and navigation.
Steps for loading projects and changing playback clips.
How to select sounds and import clips.
Overview of the HOME screen and clip editing functions.
Procedures for copying and renaming clip data.
Loading, managing, and creating projects.
Configuring project-specific parameters.
Managing samples and saving projects.
Creating tracks, changing types, and making settings.
Using pads for various modes like Mute, Cue, Clip, and Note.
Using Chord Mode for playing chords.
Editing chords and managing Scatter effects.
Loading sounds from various sources.
Step recording on tone tracks and adjusting measure settings.
Using step input and editing individual notes.
In-depth editing of step notes and motion parameters.
TR-REC for drums and pad muting functions.
Setting and removing loop start/end points.
Recording to tone/drum tracks and looper tracks.
Enabling and specifying quantization modes.
Managing motion data for knobs.
Editing motion data and using Motion Designer.
Procedures for recalling and storing scenes.
Controlling effects and editing specific effects.
Editing MFX, COMP, EQ, and changing knob assignments.
Methods to apply, record, and configure Scatter.
Basic sound editing for tone tracks.
Parameters for structure, envelopes, and LFOs.
Parameters for MIX, FILTER, AMP, EQ, and EFFECTS.
Explanation of how a tone is built from parts.
Editing individual partials and using utility features.
Basic sound editing for drum tracks.
Configuring pads and editing instrument parameters.
Configuring looper settings and editing sample waveforms.
Applying MFX and renaming looper samples.
Configuring clip settings for various track types.
Using the knob assignment function and resetting values.
Setting and understanding master clock and tap tempo.
Using send/return jacks and assignable outputs.
Adjusting system-wide settings.
Initializing SD card and restoring factory settings.
Optimizing internal memory for looper usage.
Connecting to a computer for SD card management.
Shortcuts for switching screens and modes.
Shortcuts for common editing tasks.
Shortcuts for performance control and parameter adjustments.
Tempo synchronization with DAWs and TR-8S.
Detailed explanation of sound parameters and their groups.
Parameters related to structure and oscillators.
Parameters for Unison, Pitch Control, and Range.
Tuning parameters and knob control for parts.
Oscillator types, gain, and velocity parameters.
Parameters for envelopes and filters.
Detailed pitch envelope and filter velocity settings.
Filter type, cutoff, resonance, and velocity parameters.
Amplifier envelope and LFO parameter groups.
Detailed LFO parameters and tempo synchronization.
Step LFO parameters and curve types.
Partial EQ, output, and control settings.
Configuring MIDI sources and parameter destinations.
Basic sound, MFX, and pad control configurations.
Wave group, number, and FXM settings for instruments.
Wave delay and velocity settings for instruments.
Pitch envelope settings for instruments.
Parameters for filter type, cutoff, resonance, and velocity.
Filter envelope settings and controls.
Amplifier envelope settings for instruments.
Parameters for Compressor, EQ, and MFX.
MFX control parameters and MIDI control methods.
Parameters for Delay and Chorus effects.
Reverb parameters for Integra, Warm Hall, and Hall types.
Reverb parameters for GS, SRV2000, and GM2 types.
Lists of filter, modulation, chorus, and dynamics effects.
Lists of delay, lo-fi, pitch, and combination effects.
Detailed parameters for Equalizer and Spectrum effects.
Parameters for Isolator, Low Boost, and Super Filter effects.
Parameters for Step Filter, Enhancer, and Auto Wah effects.
Parameters for Humanizer and Speaker Simulator effects.
Parameters for Phaser 1, 2, and 3 effects.
Parameters for Step, Multi Stage, Infinite Phaser, Ring Modulator.
Parameters for Tremolo, Auto Pan, and Slicer effects.
Parameters for Rotary and VK Rotary effects.
Parameters for Chorus and Flanger effects.
Parameters for Step Flanger and Hexa-Chorus effects.
Parameters for Tremolo Chorus, Space-D, Overdrive, Distortion.
Parameters for T-Scream and Guitar Amp Simulator.
Parameters for Compressor and Limiter effects.
Parameters for Sustainer, Gate, and Delay effects.
Parameters for Modulation Delay and 3Tap Pan Delay.
Parameters for 4Tap Pan Delay and Multi Tap Delay.
Parameters for Reverse Delay and Time Ctrl Delay.
Parameters for Tape Echo, LOFI Compress, Bit Crusher, Pitch Shifter.
Parameters for 2Voice Pitch Shifter and OD/DS + Chorus/Flanger.
Parameters for Distortion + Chorus/Flanger/Delay.
Parameters for OD/DS + TouchWah/AutoWah.
Parameters for GtAmpSim + Chorus.
Parameters for GtAmpSim + Flanger.
Parameters for GtAmpSim + Phaser.
Parameters for GtAmpSim + Delay.
Parameters for EPAmpSim + Tremolo/Chorus/Flanger.
Parameters for EPAmpSim + Phaser/Delay and Enhancer + Chorus.
Parameters for Enhancer + Flanger/Delay.
Parameters for Chorus + Delay.
Parameters for Flanger + Delay and Chorus + Flanger.
Parameters for the CE-1 Chorus effect.
Parameters for SBF-325, SDD-320, and 2Tap Pan Delay.
Parameters for Transient and Mid-Side EQ.
Parameters for Mid-Side Compressor, Tone Fattener, Mid-Side Delay.
Parameters for RD EPAmpSim, DJFX Looper, BPM Looper.
Parameters for the Saturator effect.
Parameters for Warm Saturator, Fuzz, JUNO-106 Chorus, Multi Mode Filter.