Roland Groovebox MC-707

113
MFX/IFX Parameters
70 Flanger
0
Delay
L in
R in
Balance D
DelayDelay
Balance D
L out
R out
Balance W
Balance W
Feedback
Balance D
FlangerFlanger
Balance D
Balance W
Balance W
Feedback
Parameter Value Explanation
Flanger Pre Delay 0.0–100 [msec]
Adjusts the delay time from the direct sound
until the anger sound is heard.
Flanger Rate
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
&
“TEMPO” (p. 52)
Flanger Rate (Hz) 0.05–10.00 [Hz]
Frequency of modulation
Flanger Rate
(note)
Note
&
“Note” (p. 120)
Flanger Depth 0–127 Depth of modulation
Flanger Feedback -98–+98 [%]
Adjusts the proportion of the anger sound
that is fed back into the eect. Negative (-)
settings will invert the phase.
Flanger Balance D100:0W–D0:100W
Volume balance between the direct sound (D)
and the anger sound (W)
Delay Time
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
&
“TEMPO” (p. 52)
Delay Time (msec) 1–2600 [msec]
Delay time from when the original sound is
heard to when the delay sound is heard
Delay Time
(note)
Note
&
“Note” (p. 120)
Delay Feedback -98–+98 [%]
Adjusts the proportion of the delay sound
that is fed back into the eect. Negative (-)
settings will invert the phase.
Delay HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which the delay
sound fed back to the eect is ltered out
(BYPASS: no cut).
Delay Balance D100:0W–D0:100W
Adjusts the volume balance between the
sound that is sent through the delay (W) and
the sound that is not sent through the delay
(D).
Level 0–127 Output Level
71 Chorus
0
Flanger
L out
R out
Balance D
FlangerFlanger
Balance D
Balance W
Balance W
Feedback
Balance D
ChorusChorus
Balance W
Balance W
Balance D
L in
R in
Parameter Value Explanation
Chorus Pre Delay 0.0–100 [msec]
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Chorus Rate
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the tempo
of the rhythm.
&
“TEMPO” (p. 52)
Chorus Rate (Hz) 0.05–10.00 [Hz]
Modulation frequency of the chorus eect
Chorus Rate
(note)
Note
&
“Note” (p. 120)
Chorus Depth 0–127 Modulation depth of the chorus eect
Chorus Balance D100:0W–D0:100W
Volume balance between the direct sound (D)
and the chorus sound (W)
Flanger Pre Delay 0.0–100 [msec]
Adjusts the delay time from the direct sound
until the anger sound is heard.
Flanger Rate
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the tempo
of the rhythm.
&
“TEMPO” (p. 52)
Flanger Rate (Hz) 0.05–10.00 [Hz]
Modulation frequency of the anger eect
Flanger Rate
(note)
Note
&
“Note” (p. 120)
Flanger Depth 0–127 Modulation depth of the anger eect
Flanger Feedback -98–+98 [%]
Adjusts the proportion of the anger sound
that is fed back into the eect. Negative (-)
settings will invert the phase.
Flanger Balance D100:0W–D0:100W
Adjusts the volume balance between the
sound that is sent through the anger (W)
and the sound that is not sent through the
anger (D).
Level 0–127 Output Level
72 CE-1
This models the classic BOSS CE-1 chorus eect unit.
It provides a chorus sound with a distinctively analog warmth.
L in L out
R outR in
CE-1CE-1
2-Band EQ2-Band EQ
2-Band EQ2-Band EQ
Parameter Value Explanation
Intensity 0–127 Chorus depth
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Level 0–127 Output Level