Roland Groovebox MC-707

58
List of Shortcut Keys
Performance
Operation Operation
To audition a track in your headphones
(CUE) When in MUTE mode
Hold down the PAD MODE [MUTE] button and press a pad.
* The PAD MODE changes to CUE mode.
To mute a track Hold down the PAD MODE [MUTE] button and Press the [SEL] button of the corresponding track.
To mute a drum part
(for each track)
Hold down the [SEL] button of the corresponding
track, and
Press a pad.
To switch parts without sounding the drums Hold down the PAD MODE [NOTE] button and
To start/stop each track Hold down the PAD MODE [CLIP] button and Press the [SEL] button of the corresponding track.
To forcibly return to the beginning of the pattern
during pattern playback
During playback
Hold down the [SHIFT] button and press the [START/STOP] button.
To silence sound that continues after stopping While stopped
Controller Values and Parameter Editing
Operation Operation
To specify the parameter operated by the total
eect knobs
Hold down the [REVERB], [DELAY], or [MULTI]
button that you want to assign, and
Turn the [FX PRM] or [FX DEPTH] knob.
To view the value of a knob
Hold down the [SHIFT] button and
Move the knob.
To change the parameter value more greatly Turn the [C1] [C2] [C3] [C4] knob or the [VALUE] knob.
To adjust the pad velocity curve Hold down the PAD MODE [NOTE] button and Turn the [VALUE] knob.
To specify tap tempo Hold down the [SHIFT] knob and Press the [ENTER] button three or more times.
To clear the Scatter pad parameters
When in Scatter mode
Hold down the [CLEAR] button and
Press a pad.
To clear the Scatter Step parameter Press the [STEP] button.
To jump between eect type categories When the MFX EDIT screen is displayed Hold down the [SHIFT] button and turn the [C2] knob.
To move to the same parameter for each band
(low, mid, high) of the TOTAL COMP
While the TOTAL COMP EDIT screen is displayed Hold down the [SHIFT] button and use the cursor [
] [ ] buttons.