Roland Groovebox MC-707

37
Total Eects
The MC-707 is equipped with ve “total eects.” Settings for these
eects are saved in the project.
&
For details, refer to “Parameter List” (p. 61).
Reverb
Adds reverberation to the sound.
Chorus/Delay
Gives the sound depth and spaciousness (Chorus), or delays the
sound in an echo-like manner (Delay).
Multi FX
Lets you select and use one of various eects such as lter or
overdrive.
Compressor
Compresses loud peaks of the master output, making the volume
more consistent.
Equalizer
An equalizer with three frequency bands (low, mid, high).
Using the [FX PRM] [FX DEPTH] Knobs and the
[ON] Button to Select the Target of Operation
By pressing one of the [REVERB] [DELAY] [MULTI] buttons you can
change the target that is operated by the knobs.
Pressing the [ON] button switches the eects on/o.
Editing Reverb or Delay
Hold down the [SHIFT] button and press the [REVERB] [DELAY] button.
The SEND EFFECTS EDIT screen appears.
Edit the parameters of the selected eect.
&
“Total Eect Parameters” (p. 80)
Use the cursor [<] [>]
buttons to select the
eect that you want to
edit.
Turn the eect on/o, and select the type of the
eect that you want to use.
Use the cursor keys to select the check box located
beside the eect name, and press ENTER to add a “(“
symbol.
&
For details, refer to “Total Eect Parameters” (p. 80).
Editing MFX/COMP/EQ
1.
Hold down the [SHIFT] button and press the [MULTI] button.
The TOTAL EFFECTS EDIT screen appears.
Edit the parameters of the selected eect.
&
“Total Eect Parameters” (p. 80)
Use the cursor [<] [>]
buttons to select the
eect that you want to
edit.
Turn the eect on/o, and select the type of the
eect that you want to use.
Use the cursor keys to select the check box located
beside the eect name, and press ENTER to add a “(“
symbol.
&
For details, refer to “Total Eect Parameters” (p. 80).
Changing the Knob Assignments
While holding down one of the [REVERB] [DELAY] [MULTI] buttons and
turning a [FX PRM] [FX DEPTH] knob, you can change the parameter
that is assigned to the knob.