Roland Groovebox MC-707

52
Master Clock
Clip switching and play/stop occurs at intervals of the master clock.
This means that the performances of each track can be synchronized
regardless of the timing of operation.
The status of the master clock is shown by the circle displayed in the
upper right of the screen. When the master clock indication points to
12 o’clock (straight up), the clip is switched or the play/stop operation
is executed.
The cycle of the master clock is specied by “SCALE” and “STEP
LENGTH.”
Master Clock Settings
1.
Hold down the [SHIFT] button and press the [TEMPO]
button.
Parameter Value Explanation
TEMPO 40.00–300.00
This is the tempo of the entire project.
In this page, you can also use the VALUE
dial to change the tempo.
SCALE
1/8,
1/16,
1/32,
1/4T,
1/8T,
1/16T,
Species the resolution.
1/8: eighth notes
1/16: sixteenth notes
1/32: thirty-second notes
1/4T: quarter note triplets
1/8T: eighth note triplets
1/16T: sixteenth note triplets
STEP LEN 2–128 Species the cycle.
Tap Tempo
Holding down the [SHIFT] button and pressing the [ENTER] button
three or more times.
The tempo is specied as average timing at which you press the
button.
Tempo Settings