12
Basic Operation
Importing a Clip
1.
Move the cursor to the position at which you want to import
a clip.
2.
Press the [CLIP] button.
The clip browser shows the projects that are in the SD card.
3.
When you use the cursor buttons to select a project, the
clips inside it are shown.
* Clips of the same type as the track type of the currently selected track are
shown.
4.
Use the cursor buttons to select the clip that you want to
import, and then press the [ENTER] button.
The clip is imported.
Importing might take some time.
When importing is completed, you return to the home screen.
To Next Page
Loading...
