Roland Groovebox MC-707

115
MFX/IFX Parameters
76 Transient
This eect lets you control the way in which the sound attacks and
decays.
L outL in
R in
Envelope
Controller
Envelope
Controller
R out
Parameter Value Explanation
Attack -50–+50
Character of the attack.
Higher values make the attack more
aggressive; lower values make the attack
milder.
Release -50–+50
Character of the decay.
Higher values make the sound linger; lower
values make the sound cuto quickly.
Output Gain -24–+12 [dB] Output gain
Sense LOW, MID, HIGH Quickness with which the attack is detected
Level 0–127 Output Level
77 Mid-Side EQ
This eect allows the left/right signals that have similar phase to be
tonally adjusted in a dierent way than the left/right signals that have
dierent phase.
L in L out
R outR in
LR
/
MS
LR
/
MS
MS
/
LR
MS
/
LR
5-Band EQ5-Band EQ
5-Band EQ5-Band EQ
Mid
Side
Parameter Value Explanation
M EQ Switch OFF, ON
Switches whether to apply tonal adjustment
to left/right input signals whose phase is
similar (in phase).
M Input Gain -12.00–+12.00 [dB]
Volume of left/right input signals whose
phase is similar (in phase)
M Low Frequency
20, 25, 31, 40, 50, 63, 80,
100, 125, 160, 200, 250,
315, 400 [Hz]
Frequency of the low range
M Low Gain -12.00–+12.00 [dB] Gain of the low range
M Mid1 Frequency
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
Frequency of the middle range 1
M Mid1 Gain -12.00–+12.00 [dB] Gain of the middle range 1
M Mid1 Q 0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 1
Set a higher value to narrow the range to be
aected.
M Mid2 Frequency
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
Frequency of the middle range 2
M Mid2 Gain -12.00–+12.00 [dB] Gain of the middle range 2
M Mid2 Q 0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 2
Set a higher value to narrow the range to be
aected.
M Mid3 Frequency
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
Frequency of the middle range 3
M Mid3 Gain -12.00–+12.00 [dB] Gain of the middle range 3
M Mid3 Q 0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 3
Set a higher value to narrow the range to be
aected.
Parameter Value Explanation
M High Frequency
2000, 2500, 3150, 4000,
5000, 6300, 8000, 10000,
12500, 16000 [Hz]
Frequency of the high range
M High Gain -12.00–+12.00 [dB] Gain of the high range
S EQ Switch OFF, ON
Switches whether to apply tonal adjustment
to left/right input signals whose phase is
distant (opposite phase).
S Input Gain -12.00–+12.00 [dB]
Volume of left/right signals whose phase is
distant (opposite phase)
S Low Frequency
20, 25, 31, 40, 50, 63, 80,
100, 125, 160, 200, 250,
315, 400 [Hz]
Frequency of the low range
S Low Gain -12.00–+12.00 [dB] Gain of the low range
S Mid1 Frequency
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
Frequency of the middle range 1
S Mid1 Gain -12.00–+12.00 [dB] Gain of the middle range 1
S Mid1 Q 0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 1
Set a higher value to narrow the range to be
aected.
S Mid2 Frequency
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
Frequency of the middle range 2
S Mid2 Gain -12.00–+12.00 [dB] Gain of the middle range 2
S Mid2 Q 0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 2
Set a higher value to narrow the range to be
aected.
S Mid3 Frequency
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
Frequency of the middle range 3
S Mid3 Gain -12.00–+12.00 [dB] Gain of the middle range 3
S Mid3 Q 0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 3
Set a higher value to narrow the range to be
aected.
S High Frequency
2000, 2500, 3150, 4000,
5000, 6300, 8000, 10000,
12500, 16000 [Hz]
Frequency of the high range
S High Gain -12.00–+12.00 [dB] Gain of the high range
Level 0–127 Output Level