Roland P-20HD - Panel Descriptions; Top Panel;Front Panel

2
Panel Descriptions
Top Panel/Front Panel
Name Explanation
INPUT section
1
[REC] button
Starts/stops recording.
Lit Recording
Unlit Recording stopped
To stop recording, hold down the [REC]
button and press the [EXIT] button.
2
[SELECT] button
Switches between input video (LIVE IN 1/LIVE IN 2/
PinP/SPLIT). The LED for the selected input lights up.
3
[AUDIO OUT] knob
Adjusts the output volume.
Pad section
4
[STILL] button
Switches the pad functions to select still image
clips.
[AUDIO] button
Switches the pad functions to select audio clips.
[CLIP LIST] button.
Switches the pad functions to select video clips.
[PALETTE] button
Switches the pad functions to select video clips
within a palette.
5
Pads [1]–[8]
Used for selecting the clip (video/still image/
audio) assigned to each pad.
6
[<] [>] buttons
Switches the pad page.
7
[SPEED] lever
Adjusts the playback speed.
8
[SPEED RANGE]
button
Switches between ranges of playback speeds that
can be adjusted using the [SPEED] lever.
OUTPUT section
9
[LIVE IN] button
Outputs video from the LIVE IN bus.
[REPLAY] button
Outputs video from the REPLAY bus.
AUTO PLAY section
10
[CLIP] button
Plays back the video clip.
[PLAYLIST] button
Plays back the playlist.
11
Cooling vents
Heat from inside the P-20HD is released from these
vents.
* Do not block the cooling vents. If the cooling vents are
blocked, the internal temperature might rise, causing the
unit to malfunction.
Name Explanation
MARKER section
12
[LIVE IN] button
Switches between marker reference times.
Lit LIVE IN time
Unlit REPLAY time
[DELETE] button
Deletes a bookmark.
[IN] [OUT] buttons
Sets the video clip’s start time (IN point) and end
time (OUT point).
[BOOKMARK]
button
Sets a marker (bookmark) in the recording data.
[MAKE CLIP] button
Creates a video clip whose OUT point is the
moment at which you press the button.
TRANSPORT section
13
[
] button
Stops the video that’s currently playing
back.
Video Paused
Audio Muted
[ ø] button
Plays back the recorded video.
[ô] [û] buttons
Jumps to the next bookmark (or previous
bookmark).
14
[MENU] button
Shows or hides the menu.
15
[EXIT] button
Exits a menu level or cancels an operation.
16
[VALUE] knob
(ENTER)
Turning
Selects a menu item, or edits the
value of a setting.
Pressing
Conrms a selected menu item or
an edited setting. Also executes an
operation.
JOG/SHUTTLE section
17
[JOG] button
Sets the [JOG/SHUTTLE] dial to jog mode (p. 15).
[SHUTTLE] button
Sets the [JOG/SHUTTLE] dial to shuttle mode
(p. 15).
18
[JOG/SHUTTLE] dial
In jog mode/shuttle mode, adjust the frame
advance, frame rewind, and playback speed.
When you press the dial while in shuttle mode,
shuttle mode is turned o.
Front Panel
Name Explanation
19
PHONES jack
Connect your headphones here.
20
[PHONES] knob
Adjusts the headphone volume.
21
SD card slot
Insert an SD card here.