5. Turn off the power to the SP-404SX.
6. Insert the SD card to the SP-404SX.
7. Turn the power on to the SP-404SX. The update process starts
automatically.
8. While updating, the "UPd" message will be displayed and the dot will
blink on the display.
9. When the update process is completed, the "Fin" message will be
displayed
10. Turn off the power to the SP-404SX and remove the SD card from the
SP-404SX.
11. Please verify the version number “1.07” with the procedure described
in “How to know the version” part of this document. After you
perform the update, you must delete the update file from the SD
memory card for normal usage.
© 2012 Roland Corp. U.S.
To Previous Page
Loading...
