Roland BOSS SDE-3000EVH

© 2023 Roland Corporation
01
Players Guide
EVH, the EVH logo, and the Stripe Design © used under license from EVH Brands, LLC

Roland BOSS SDE-3000EVH Specifications

General

Type	Digital Delay
Number of Delay Lines	2
Input Connectors	1/4-inch phone type, XLR type
Output Connectors	1/4-inch phone type, XLR type
EVH Mode	Yes
Connectivity	MIDI In/Out
Power Supply	AC Adaptor
Controls	Knobs, Buttons

Summary

Configuring InputOutput Settings

Unity Gain Level Adjustment

Adjusting the unit's gain level for optimal performance with your specific rig.

1. Mono Rigs Setup

Mono In-Front-of-Amp Setup

Details connecting the SDE-3000EVH before the amplifier in a mono setup.

2. Stereo Rigs Setup

Stereo FX Loop Configuration

Connecting the SDE-3000EVH in an amp's FX loop for stereo delay sounds.

3. WDW (WETDRYWET) Rigs

WETDRYWET 3 AMP RIG

Setup for a three-amp WET/DRY/WET configuration using the SDE-3000EVH.

WETDRYWET with ModelerMixer

Using the SDE-3000EVH with modeling processors and recording interfaces.

Adjusting and Storing Presets

How to Store a Preset

Step-by-step guide on how to save custom parameter settings on the device.

EVH Custom Presets

EVH Preset List

Presets for Three-Amp Output

Lists EVH presets optimized for three-amp output configurations.

Presets for Stereo Output

Lists EVH presets optimized for stereo output configurations.