Need help?Do you have a question about the Roland Sound Brush SB-55 and is the answer not in the manual?
General| Brand | Roland |
|---|---|
| Model | Sound Brush SB-55 |
| Category | Recording Equipment |
| Language | English |
Precautions for using the correct power adaptor and connections to prevent damage.
Guidelines for unit placement to avoid damage, interference, and environmental issues.
Instructions for cleaning the unit safely without causing discoloration or deformation.
Warnings about impact, liquids, display pressure, and the need for qualified service.
Description of the Sound Brush's front panel controls, indicators, and connectors.
Description of the Sound Brush's rear panel connectors and jacks.
How to connect the Sound Brush with sound modules and MIDI keyboards.
Procedure for connecting the AC adaptor to power the unit.
Instructions for installing the unit into a rack mount adaptor.
Steps to safely turn on the Sound Brush after connections are made.
Instructions for preparing the remote control unit, including battery insulation.
Explains the range, aiming, and functions of each button on the remote.
How to turn the remote control reception switch on or off.
Step-by-step guide for replacing the remote control's battery.
Procedures for inserting and removing disks from the drive.
Adjusting tempo, stopping, pausing, fast-forwarding, and rewinding.
How to select different songs for playback.
Using a pedal switch and other convenient playback functions.
How to set up and initiate programmed playback sequences.
How to enable and use random playback of songs.
How to define and activate repeat sections within a song for practice.
Procedure to disable Block Repeat settings.
Explanation of MIDI file formats and their compatibility with the unit.
Diagrams showing how to connect MIDI keyboards and sound modules for recording.
How to configure MIDI local control and soft thru functions.
Basic explanation of what a sequencer is and how it differs from tape recorders.
Steps to initialize or format disks for use with the Sound Brush.
How to record new songs or re-record (clear) existing song data.
Connection setup for recording MIDI data from external sources.
Step-by-step process for recording MIDI data from other devices.
How to set the time base for accurate data recording to external devices.
How to switch the display between Tempo, Measure Number, and Song Number.
How to turn Auto Play functionality on or off.
How to specify the delay between songs during continuous playback.
How to enable or disable the Auto Rewind function.
Procedure for copying one song from a source disk to a destination disk.
Procedure for copying all songs from a source disk to a destination disk.
How to assign incoming MIDI data to specific buttons for later transmission.
How to transmit assigned packets and enable auto-transmission.
How to cancel previously assigned MIDI packets.
How to set up the Sound Brush to control other MIDI devices via MIDI Clock.
How to set up other MIDI devices to control the Sound Brush via MIDI Clock.
How to enable or disable MIDI Clock output signals from the unit.
How to configure the unit to accept play/stop commands from external MIDI devices.
How to convert a single song to high-speed correspondence format.
How to convert all songs on a disk to high-speed correspondence format.
How to enable or disable the MIDI Update function for accurate playback.
Procedure to reset all system functions to their default factory values.
Solutions for problems related to powering the unit or disk drive operation.
Troubleshooting steps for when no sound is produced by the unit.
Solutions for incorrect sound when using a connected MIDI keyboard.
Troubleshooting steps for when playback does not start after inserting a disk.
Solutions for problems encountered during the recording process.
Troubleshooting steps for when the remote control unit is not functioning correctly.
Solutions for problems using the Block Repeat playback feature.
Troubleshooting steps for incorrect sound during playback from mid-song.
Explains various disk-related error messages and their solutions.
Solutions for errors related to song copying and copyright protection.
Troubleshooting for issues with MIDI device connection and communication.
Solutions for errors related to MIDI packet data storage and transmission.
Information on general system errors (Error 1, Error 2) and contacting service.
Basic explanation of MIDI message transmission, connectors, and channels.
Explains Soft Thru, Local Control, and common MIDI messages.
Information on Program, Control Change, System, and Realtime MIDI messages.
Explanation of exclusive messages and how to use MIDI implementation charts.
Quick reference table for playback and recording functions.
Quick reference table for song copying and deletion procedures.
Quick reference table for system settings and miscellaneous functions.
Details the structure and byte format of Roland's exclusive MIDI messages.
Explanation of techniques for transferring data based on memory addresses.
Describes the method for sending short exclusive messages without checks.
Illustrates examples of data exchange using exclusive messages.
Lists MIDI messages the unit can receive in various modes.
Details MIDI messages the unit transmits and creates for synchronization.
Technical specifications for the Sound Brush unit, including weight, dimensions, and power.
Technical specifications for the remote control unit, including range and battery.
Details on the disk drive capacity and supported disk format.
Lists the items included with the unit and optional accessories.
Brief biographies of the artists who created the demo songs.
To Next Page