Roland Spirit-10A User Manual

Connects the guitar, with options for normal/high input.

Adjusts distortion, can be activated by pulling the knob.

Includes preamplifier volume and master volume with presence effect.

Adjusts Bass, Middle, and Treble frequencies for tone shaping.

Adjusts the level of the reverb effect.

Jacks for Overdrive and Reverb footswitches for hands-free control.

Includes Pre Out/Line Out for connecting to external equipment.

For connecting effect devices between Pre Out and Main In on SPIRIT-40A.

Pilot Lamp indicates power status; Power Switch turns the unit on/off.

Illustrates the fundamental connection of a guitar to the amplifier.

Shows how to connect headphones and external sound systems.

Setting for clean tone, connecting to Normal/High input.

Setting for short sustain Over Drive sound.

Setting for longer sustain Over Drive, adjusting with knobs.

Avoid neon lamps, humidity, dust, strong shocks, and move while operating.

Turn volume to zero, connect guitar first, disconnect amplifier first.

Use the specific fuse for replacement.

Addresses issues like no pilot lamp, no sound, or effect not obtained.

Details output, speaker, input jacks, controls, consumption, dimensions, and weight.

Lists optional items like Stereo Headphones and Foot Switches.