Need help?Do you have a question about the Roland SRV-2000 and is the answer not in the manual?
General| Type | Digital Reverb |
|---|---|
| Sampling Rate | 44.1 kHz |
| Bit Depth | 16-bit |
| Number of Programs | 32 |
| Frequency Response | 20 Hz - 20 kHz |
| Dynamic Range | 90 dB |
| Presets | 32 |
| Sampling Frequency | 44.1 kHz |
| Total Harmonic Distortion | 0.05% |
| Input Connections | XLR |
| Output Connections | XLR |
| Inputs | XLR, 1/4" Phone |
| Outputs | XLR, 1/4" Phone |
| Reverb Types | Hall, Room, Plate |
Overview of the SRV-2000's signal processing path and digital operation.
Explanation of analog board sections like Head Amp, Filter Driver, and LPF.
Description of the switch board's role in user interface and signal routing.
Procedure for verifying and adjusting critical DC power supply voltages.
Instructions for entering and using the diagnostic delay mode.
Settings for parameters within the SRV-2000's test delay mode.
Steps to calibrate delay time accuracy and LED meter response.
Procedures for calibrating DAC output and verifying signal levels.
To Next Page
