Roland SYSTEM-500 530 - User Manual

1
SYSTEM-500 530 Q&A
2016/01/14
Q :
What can be accomplished using the SUM output from the SYSTEM-500 530?
A :
You can mix and output a total of 6 channels of input.
You can also use the system as a 6-channel mixer.
Q :
What kind of power unit is required when mounting a SYSTEM-500 series unit in a
Eurorack case?
A :
The separately available SYR-E84 can be used.
If you're using a power unit of other make, use one capable of supplying the required
current to each respective module.
Ensure that the total current consumption of the respective modules does not exceed
the capacity of the power supply.
The required current values of the respective modules are as follows.
 SYSTEM-500 512 : +12V 70mA / -12V 55mA
 SYSTEM-500 521 : +12V 40mA / -12V 40mA
 SYSTEM-500 530 : +12V 50mA / -12V 35mA
 SYSTEM-500 540 : +12V 85mA / -12V 50mA
 SYSTEM-500 572 : +12V 110mA / -12V 90mA
Q :
Can miniature stereo phone plug cables be used with a SYSTEM-500 series unit?
A :
Use miniature monaural phone plug cables.
Q :
Can power cables of other makes be used with a SYSTEM-500 series unit?
A :
Use the cables included with the SYSTEM-500 series unit.

Summary

SYSTEM-500 530 Q&A

SUM Output Functionality

Explains how the SUM output of the SYSTEM-500 530 can be used to mix and output 6 input channels or function as a 6-channel mixer.

Power Unit Requirements for Eurorack

Details power unit requirements for SYSTEM-500 series units in Eurorack cases, including specific module current consumption.

Cable Compatibility for Audio

Specifies the type of miniature phone plug cables (monaural) to use with SYSTEM-500 series units.

Power Cable Usage

Advises using only the included power cables with SYSTEM-500 series units.

Unit Mounting Procedure

Provides instructions on how to mount a SYSTEM-500 series unit in a case, recommending the owner's manual and proper screws.

Power Cable Connection

Directs users to the owner's manual for instructions on connecting the power cable to a SYSTEM-500 series unit.

Inputtable CV Range

States the inputtable Control Voltage (CV) range for the SYSTEM-500 series is -/+10 V, noting signal distortion with -/+12 V.

Roland SYSTEM-500 530 Specifications

General

Brand	Roland
Model	SYSTEM-500 530
Category	Control Unit
Language	English