Roland V-Accordion FR-1x - Saving and Managing User Programs; Saving Current Settings to User Program

Saving your settings (User Program)
V-Accordion r
37
11. Saving your settings (User Program)
Your FR-1x contains 8 User Program memories where you can store the settings listed below. Working with those mem-
ories has the advantage that you can recall frequently used settings at the press of a button. The User Program settings
also include the “address” of the last Set you selected.
The following settings are saved to the User Programs:
Saving the current settings
Here is how to save the current settings.
1. Press and hold the [USER PROGRAM] button
to select write mode.
The display now shows a flashing “U––” message.
The USER PRG indicator below the display lights to
indicate that the FR-1x is now in User Program mode.
NOTE
If you made a mistake and do not want to save your set-
tings, press the [USER PROGRAM] button to leave this
function.
Set
Number of the current Set
Treble section
Register
Octave setting
Bass-to-Treble mode
Treble valve noise
Orchestra
Register
Octave setting
Level
Organ
Register
Octave setting
Level
Bass & Chord section
Register
Bass button noise
Bass reed growl
Orchestral Bass
On/Off
Register
Level
Orchestral Chord
On/Off
Register
Level
Orchestral Free Bass
On/Off
Register
Level
Drum mode
On/Off
Drum Set number
Level
Free Bass
On/Off
Register
Free Bass button noise
Free Bass reed growl
Other parameters
Reverb Type
Chorus Type
Reverb Level
Chorus Level
Balance
MIDI parameters
Treble Octave Tx
Bass/Free Bass Octave TX
Chord Octave TX
Orchestra/Organ Octave TX
Orchestra Bass Octave TX
Orchestra Chord Octave TX
Orchestra Free Bass Octave TX
U--
Lights
FR-1x GB.book Page 37 Tuesday, November 8, 2011 11:44 AM