Saving your settings (User Program)
V-Accordion
r
39
The display now shows a flashing “Uxx” message (the
“xx” refers to the User Program you have been editing
thus far).
5.
Do one of the following:
•To replace (overwrite) the settings of the User Pro-
gram you have been editing, press the [SET] register.
•To save the new version to a different User Program
memory, press the assigned treble register (once or
twice), then press [SET].
Your settings are saved to the selected User Program
memory.
6.
Press the [USER PROGRAM] button again to
leave this mode.
The USER PRG indicator below the display goes dark
to indicate that the FR-1x is no longer in User Pro-
gram mode. At this point, the FR-1x returns to the
settings you were using before selecting User Pro-
gram mode, and the display once again shows the
main page.
NOTE
While the USER PRG indicator below the display flashes,
you can select another Set.
U1A
Flashes
FR-1x GB.book Page 39 Tuesday, November 8, 2011 11:44 AM
To Next Page
Loading...
