®
Saving just a specific parameter group (Advanced)
106
r
FR-7x V-Accordion
Saving just a specific parameter
group
You can also decide to save only the “Master Tune”,
“Scale Tune”, “System” or “MIDI” settings:
(1) After making the required changes, press and hold
the [MENU÷WRITE] button.
The display now shows a page similar to the follow-
ing:
(2) If necessary, use the [DATA÷ENTER] knob to deselect
“AllParam”.
This will uncheck all other boxes as well.
(3) Rotate the [DATA÷ENTER] knob to select the check-
box of the parameter group whose settings you
want to save, then press [DATA÷ENTER] to confirm.
(4) Rotate the [DATA÷ENTER] knob to select the “✔”
mark and press it to confirm your choice.
(5) Press the [MENU÷WRITE] button.
The display briefly shows the following message:
When finished, the display shows the “Function Com-
plete” message.
FR-7x GB.book Page 106 Tuesday, August 25, 2009 10:58 AM
To Next Page
Loading...
