Need help?Do you have a question about the Roland VR-09 Editor and is the answer not in the manual?
Company and product names are registered trademarks or trademarks of their respective owners.
Precautions on data loss, product changes, and display discrepancies between manual and unit.
Explains VR-09 Editor usage via wireless LAN using a USB adapter.
Steps to configure VR-09 Editor for wireless LAN connection, including selecting the device.
Lists the necessary items for connecting the VR-09 Editor via USB cable, including the VR-09 and cables.
Step-by-step instructions on how to physically connect the iPad to the VR-09 using a USB cable.
Steps to configure VR-09 Editor for USB connection, including selecting the device.
Details the main controls and sections of the Organ Tone display.
Covers Percussion, Organ Type, Tone Wheel, Harmonic Bars, Vibrato/Chorus, Rotary, and Setup Button.
Used to make global on/off settings for the parts.
The number of bars and effects change; the pedal part disappears.
Covers Parts, Partials, Parameters, and Common parameter sections.
Explains READ button, Organ/Synth switching, and Setup button.
Indicates the status of the UPPER or LOWER part: assigned, editable.
Explains button functions for selecting a part for editing.
Turn each partial on/off.
Select the partial that you want to edit.
Details tone name, parameter name/value, and parameter select tabs.
Details parameters shown when the OSC/FILTER/AMP tab is selected.
Details parameters shown when the LFO tab is selected.
How to read and edit VR-09 Organ Tone parameters in VR-09 Editor.
How to tap a button or switch to change its setting.
How to drag knobs or bars to change values and reset them.
Behavior when tapping PCM number for WAVE, showing the WAVE NUMBER popup.
How to tap a button or switch to change its setting.
How to drag knobs or sliders to change values and reset them.
Company and product names are registered trademarks or trademarks of their respective owners.
Precautions on data loss, product changes, and display discrepancies between manual and unit.
Explains VR-09 Editor usage via wireless LAN using a USB adapter.
Steps to configure VR-09 Editor for wireless LAN connection, including selecting the device.
Lists the necessary items for connecting the VR-09 Editor via USB cable, including the VR-09 and cables.
Step-by-step instructions on how to physically connect the iPad to the VR-09 using a USB cable.
Steps to configure VR-09 Editor for USB connection, including selecting the device.
Details the main controls and sections of the Organ Tone display.
Covers Percussion, Organ Type, Tone Wheel, Harmonic Bars, Vibrato/Chorus, Rotary, and Setup Button.
Used to make global on/off settings for the parts.
The number of bars and effects change; the pedal part disappears.
Covers Parts, Partials, Parameters, and Common parameter sections.
Explains READ button, Organ/Synth switching, and Setup button.
Indicates the status of the UPPER or LOWER part: assigned, editable.
Explains button functions for selecting a part for editing.
Turn each partial on/off.
Select the partial that you want to edit.
Details tone name, parameter name/value, and parameter select tabs.
Details parameters shown when the OSC/FILTER/AMP tab is selected.
Details parameters shown when the LFO tab is selected.
How to read and edit VR-09 Organ Tone parameters in VR-09 Editor.
How to tap a button or switch to change its setting.
How to drag knobs or bars to change values and reset them.
Behavior when tapping PCM number for WAVE, showing the WAVE NUMBER popup.
How to tap a button or switch to change its setting.
How to drag knobs or sliders to change values and reset them.
To Next Page
General