How to fix fabric that is too wide for Rollease Acmeda Whiteboard installation?
To resolve the issue of fabric being too wide for installation in your Rollease Acmeda Whiteboard, adjust the installation width to match the measured blind width, or correct the fabric width to the correct size based on the actual installation width.
What to do if the weight bar end cap hits the inner rail on my Rollease Acmeda Whiteboard?
To address a weight bar end cap hitting the inner rail on your Rollease Acmeda Whiteboard, first, ensure there's a 3mm gap between the weight bar end cap and the inner rail. If there isn't enough clearance, verify that the actual installation width matches the measured blind width and that the weight bar length is cut according to Acmeda's specifications. If the installation width doesn't match the measured blind width, correct the installation width accordingly, or trim the weight bar length to the correct size based on the actual installation width.
Why can't I install the inner rail into my Rollease Acmeda Whiteboard to feed the zip?
If you cannot install the inner rail into the blind to feed the zip on your Rollease Acmeda Whiteboard, it may be due to the weight bar length being too long. Check that the actual installation width matches the measured blind width. If the installation width does not match the measured blind width, correct the installation width to match the measured blind width or trim the weight bar length to the correct size based on the actual installation width.
How to fix a Rollease Acmeda Whiteboard installation that is not square?
If the installation of your Rollease Acmeda Whiteboard is not square, check that the overall width of the U-mounting rail and inner rail is within 42-62mm. Also, check that the inner rails are level and parallel. If either check fails, the installation space requires additional packing. The side rails or entire system may need to be removed to correct the issue.
Why is the weight bar uneven on my Rollease Acmeda Whiteboard?
If your Rollease Acmeda Whiteboard has an uneven weight bar, ensure the box is level. Also, check that the inner rails are level and parallel. If the inner rails are not level and parallel, remove rivets from the U-mounting channel, reposition the inner rail to reduce tension, and re-secure the inner rail.
What to do if there is not enough weight in the Rollease Acmeda Whiteboard weight bar?
If there is not enough weight in the weight bar of your Rollease Acmeda Whiteboard, add ballast. For spring operated blinds, the number of pre-turns will most likely need to be increased.
What to do if the inner rail length is too long on Rollease Acmeda Whiteboard?
If the inner rail length is too long on your Rollease Acmeda Whiteboard, check that the actual installation drop dimension matches the measured blind drop. If the installation drop does not match the measured blind drop, correct the installation drop to match the measured blind drop. Trim the inner rail length to the correct size based on the actual installation width.
Why is my Rollease Acmeda Whiteboard spring operated blind heavy to push up?
If your Rollease Acmeda Whiteboard spring operated blind is heavy to push up, it may be because there are not enough pre-turns. Increase the number of pre-turns on the spring.
What to do if SB07 Weight Bar lock doesn’t locate into latch on Rollease Acmeda Whiteboard?
If the SB07 Weight Bar lock doesn’t locate into the latch on your Rollease Acmeda Whiteboard, it may be because the latch has not been secured in the correct position. Re-install the latch so the shaft locates into the latch.
Why is my Rollease Acmeda Whiteboard spring operated blind stuck?
If your Rollease Acmeda Whiteboard spring operated blind is stuck and will not move, the spring pre-tension idler may not have been unlocked. Ensure the pre-tension idler is unlocked on both ends of the system.
Fabric settling process to prevent rippling after installation.
Instructions for smoothly lowering and raising shades using spring mechanism.
Guide to attaching/detaching crank handle and operating the shade.
Details on using Automate remote, channels, and levelling control.
Pairing Zipscreen with smart hubs for app and voice control.
Important precautions for safe operation and maintenance of Zipscreen.
Recommended methods for cleaning Zipscreen hardware and fabric.
Information on warranty coverage and how to get technical support.
General| Brand | rollease acmeda |
|---|---|
| Model | ZIPSCREEN |
| Category | Window Blinds |
| Language | English |
To Next Page
