9. CAUTIONS
I. When the unit is not being used, it is recommended that you
remove all
batteries from the battery compartment. This will safeguard
against any
damage to the piano from battery leakage.
II. When using the adaptor, make sure that the batteries are
removed.
III. If you are using the piano by means of an electrical outlet,
always switch off the piano and remove the adaptor from the
main after use.
IV. Keep the keyboard level when in use. Place uneven
surface or move the keyboard around while playing. This may
damage the functions.
V. Do not tamper with the wiring of this product with a cutter or
other sharp tools. Is may damage the keyboard functions.
VI. When rolling up the keyboard after use, Do not roll it too
tight.
VII. Do not pull or twist the body or keyboard.
VIII. Do not place the piano near areas with strong electric
waves. The waves may affect and damage the product
functions.
IX. Do not separate any of the piano’s parts.
X. Do not use the piano in a wet or dusty area.
XI. Avoid usage and storage in high temperature or high
humidity. High temperatures and moisture may cause the
product malfunction.
9. AVVERTENZE
I. Si consiglia di rimuovere tutte le batterie dal vano batterie
quando non si usa l’unità. Questo proteggerà Roller Piano da
qualsiasi possibile danno dovuto alla perdita di liquido della
batteria.
II. Quando si usa l’adattatore, assicurarsi che le batterie siano
state rimosse.
III. Se si usa la pianola mediante una presa di corrente,
spegnere sempre Roller Piano e rimuovere l’adattatore dalla
linea di alimentazione dopo l’uso.
IV. Tenere la tastiera a livello durante l’utilizzo. Posizionare
su supercie irregolare o muovere la tastiera durante l’utilizzo
potrebbe danneggiare Roller Piano.
V. Non manomettere i li del presente prodotto con un arnese
da taglio o altri strumenti aflati. Questo potrebbe danneggiare
le funzioni della tastiera.
VI. Dopo l’uso, non arrotolare la tastiera in modo troppo
stretto.
VII. Non tirare o torcere il corpo o la tastiera.
VIII. Non collocare Roller Piano in prossimità di aree con forti
onde elettriche. Le onde possono danneggiarlo.
IX. Non dividere alcuna parte di Roller Piano.
X. Non usare Roller Piano in un’area umida o polverosa.
XI. Evitare di utilizzare e riporre ad alte temperature o ad
elevata umidità. Le alte temperature e l’umidità possono
causare il malfunzionamento del prodotto.