Rollerdor RD10X2ELL - Safety Edge Exclusion Zone Setup; Configuring Safety Edge Sensitivity

7
Rollerdor RD10X2ELL Control Box, Edition 2022/1
Pictures are for illustration purposes only, connector blocks are not provided and further fittings may be required.
1
The curtain is supplied with stops at each end to stop an uneven floor having an eect (fig.13) but if the curtain
reopens having hit the floor the safety edge exclusion should be set to ‘turn o’ the edge 50mm before it hits the floor.
Please be aware the safety edge will have to return to the top limit before closing and the alarm will be disabled.
SAFETY EDGE EXCLUSION ZONE
fig.13