Rollplay 24V TURNADO W401-OB

Questions and Answers

C
Cindy YoungAug 3, 2025
What to do if my Rollplay Golf Car does not run?
- P
  pkeithAug 3, 2025
  If your Rollplay Golf Car isn't running, there are several potential causes. First, the battery might be low or dead, in which case you should recharge it or call Customer Service for a replacement. Check if the battery terminal connector is loose or detached and reconnect it. It's also possible that the drive chain fell off, so reinstall it. If the electrical components are broken or the motor is damaged, contact Customer Service for troubleshooting or repairs.
A
Alexis MarksAug 9, 2025
Why does my Rollplay Golf Car run slowly?
- S
  Steven RuizAug 10, 2025
  Your Rollplay Golf Car might be running slowly due to several reasons. The battery might not be fully charged, so ensure a secure connection when recharging. If the battery is old, contact Customer Service to order a replacement. Also, too much weight on the vehicle, harsh conditions, or a flat tire can cause it to run slowly. Make sure to reduce the weight to no more than 68 kg / 150lbs, operate the vehicle on level ground and safe surfaces and inflate the tire. Finally, a worn caster wheel may be the problem, so contact Customer Service.
J
Jessica GonzalezAug 18, 2025
What to do if Rollplay Golf Car only runs for a short time?
- S
  Stephanie NobleAug 18, 2025
  If your Rollplay Golf Car only runs for a short time, it could be due to an undercharged or overcharged battery, or because the battery is old. Ensure a secure connection when recharging the battery and recharge it for at least 8-12 hours. Never charge the battery for more than 30 hours. If the battery is old, replace it.
J
James MartinAug 25, 2025
Why is my Rollplay 24V TURNADO W401-OB Golf Cars' motor or gearbox making a grinding noise?
- B
  brett49Aug 26, 2025
  If the motor or gearbox of your Rollplay Golf Car is making a grinding noise, it could be due to motor or gear damage, in which case you should call Customer Service. Alternatively, the caster wheel screw might be loose, so try tightening it. It is also possible that the caster wheel is worn, so you should replace it.