Parking brake linkage
Lubricate
the
pivot
pins
and
pulleys
in
the parking
brake system with approved grease.
Spare wheel carrier
Lubricate
the spare wheel
carrier
lowering
bolt
and
mechanism.
Tyres
Check the tread depth
of
all
tyres, inspect
all
tyres
for
signs of damage. Check the tyre pressures
when they are cold
and
adjust
if
necessary.
Note
Inc I ude the spare tyre.
Test
Road test the car
for
satisfactory
performance.
Seasonal Schedules
Every 12 months
Engine cooling system
Drain
the coolant from radiator and engine
crankcase.
Fi
11
with the correct
anti
·freeze mixture.
Clean any debris from the surfaces
of
the
refrigeration
condenser and radiator matrices
by
reverse
flushing
with a hose.
This
should be carried
out
just
prior
to the autumn.
Body
drain holes
Check
that
the body drain ho! es are unobstructed.
Air conditioning system
Check that the foam
filter
element(s)
fitted
to the
scuttle
intake
gri 1
le
is
free from
obstruction.
Refrigeration system
Check the refrigeration system
for
correct operation,
rectify
if
necessary. Any work must be carried
out
by
an
experienced engineer.
Every
2
years
In
addition
to
12
monthly seasonal schedule,
carry out the
following
operation.
Engine cooling system
When
the coo I ant has been drained, thorough I y
reverse
flush
the coolant passages
with
a con-
tinuous
flow
of water.
Fit
new hoses where
necessary.
Service Recommendations
For
convenience these
services
may be carried
out
at
the brake
pad
renewal nearest to the
specified
mileage.
Every 80 000 kilometres (48 000 miles)
At
this
mileage under normal motoring
conditions
it
is
recommended that the
following
servicing
is
carried out.
Automatic height control and braking systems
Examine the sub-frame to brake
caliper
hoses
for
chafing
or
surface cracking; renew
if
necessary.
Fit
new front and rear accumulator to frame hoses.
1::12
• 8
Every 160 000 kilometres (96 000 miles)
At
this
mileage under normal motoring
conditions
it
is
recommended
that
the fol lowing
service
is
carried out.
Automatic height control
and
braking systems
Fit
all
new
flexible
hoses to the braking systems
and
automatic
height
control system.
Fit
new
seals
to the
disc
brake
calipers
and the
deceleration
conscious
pressure
limiting
valve.
Fuel system
Fit
a new convoluted rubber hose between the fuel
filler
head and fuel tank assembly.
Examine
all
flexible
fuel pipes and renew any
which show
signs
of
deterioration.
To Next Page
Loading...
