Seasonal Schedules
Every
12
months
Engine cooling system
Drain the coolant from radiator and engine
crankcase.
Fi
II
with
the correct anti-freeze mixture.
Clean any debris from the surfaces of the
refrigeration
condenser and radiator
matrices
by
reverse
flushing
with
a hose.
This
should
be
carried
out
just
prior
to
the autumn.
Body drain holes
Check that the body drain
holes
are unobstructed.
Air
conditioning system
Check that the foam
filter
element(s)
fitted
to the
scuttle
intake
grille
is
free from
obstruction.
Refrigeration system
Check the refrigeration system for correct operation,
rectify
if
necessary. Any work must be carried
out
by
an
experienced engineer.
Every 2 years
In
addition
to
12
monthly seasonal schedule,
carry
out
the fol lowing operation.
Engine cooling system
When
the
coolant has been drained, thoroughly
reverse
flush
the coolant passages
with
a
con·
tinuous
flow
of
water.
Fit
new hoses where
necessary.
Service Recommendations
For
convenience these
services
may
be
carried out
at
the brake pad renewal nearest to the
specified
mileage.
Every 80 000 kilometres (48 000
miles)
At
this
mileage under normal motoring
conditions
it
is
recommended that the
following
servicing
is
carried
out.
Automatic height control
and
braking systems
Examine the sub-frame
to
brake
caliper
hoses
for
chafing
or
surface cracking; renew if necessary.
Fit
new front and rear accumulator to frame hoses.
Every 160 000 kilometres (96 000
miles)
At
this
mileage under normal motoring
conditions
it
is
recommended
that
the
following
service
is
carried
out.
Automatic height control
and
braking systems
Fit
all
new
flexible
hoses to the braking systems
and automatic
height
control system.
Fit
new seals to the
disc
brake
calipers
and the
deceleration
conscious pressure Ii
mi
ting
valve.
E16 • 6
Fuel
system
Fit
a new convoluted rubber hose between the fuel
fi
11
er head and fuel tank assembly.
Examine
alt
flexible
fuel
pipes
and renew any
which show signs
of
deterioration.
To Next Page
Loading...
