-g
"'
0,
C:
w
C
¥
E
:J
Torque converter transmission
Change the transmission
fluid.
Preventive Maintenance
Cont
ro
I I i nka ges
Apply
a few drops
of
engine oi I to the accelerator
Ii
nkage
and
to the gear range se I
ector
controls
adjacent to the transmission casing.
Electrical
system
Check
all
interior
lamps, exterior lamps,
instruments, warning lamps and devices
for
correct
operation; recti
iy
if
necessary.
Parking brake linkage
Lubricate
the
pivot
pins
and
pulleys
in the parking
brake system with approved grease.
Spare wheel carrier
Lubricate
the spare wheel
carrier
lowering
bolt
and
mechanism.
Tyres
Check the tread depth of al I tyres, inspect al I the
tyres for signs
of
damage. Check the tyre pressures
when they are
cold
and
adjust
if
necessary.
Note
Include the spare tyre.
I!!
Test
0
i Road
test
the car for
satisfactory
performance.
<V
0
>-
Preventive Maintenance
Carburetters
Top-up the
oil
level
in the
air
valve
dampers.
Control I inkages
Apply
a few drops
of
engine
oil
to the accelerator
I inkage and to the gear range
selector
controls
adjacent to the transmission
casing.
Electrical
system
Check al I
interior
lamps,
exterior
lamps,
instruments, warning lamps and
devices
for
correct
operation;
rectify
if
necessary.
Parking brake linkage
Lubricate
the
pivot
pins
and
pulleys
in
the parking
brake system with approved grease.
Tyres
Check the tread depth
of
all
tyres, inspect
all
tyres
for signs
of
damage. Check the
tyre
pressures
when they are
cold
and
adjust
if
necessary.
Note
Include the spare tyre.
Test
Road
test
the car
for
satisfactory
performance.
~
40 000
kilometres
(24 000
miles)
or
2
years
~
service whichever is the
earlier
0
er
©
,_
<I'
Cl
(f)
t-
30 000 kilometres (18 000 miles) or 18 months
service whichever
is
the earlier
Essential Maintenance
Engine
Change the engine
oil.
Fit
a new
oil
filter.
Exhaust system
Check
grass-fire
heatshields
for damage.
Rectify
or
renew
shields
to ensure that a minimum clearance
of
5
mm.
(0.20 in.)
is
maintained between the
heatsh i
el
ds and exhaust pipes.
Battery
Check the level
of
the
electrolyte
and
if
necessary,
top~p
with
distil
Jed
water.
Belt
tension
Check the tension
of
all
driving
belts
and reset
ii
necessary.
Brakes
Inspect the foolbrake and parking brake pad
linings;
fit
new
linings
if
necessary.
When
changing
foot-
brake pads examine the condition
of
the
dust
excluders
on
the
calipers;
renew if necessary.
Manually
adjust
the parking brake pads.
Inspect
all
brake
pipes
and connecti.ons; the
Distributor/Retailer
should report any defects to the
Owner.
Fluid
levels
Check
all
fluid
levels
and correct if necessary.
Essential Maintenance
Air
injection
pump
Check the
belt
tension and reset if necessary.
Air
injection system
Check the
air
injection
system
for
leaks
and correct
operation; renew any
defective
items.
Air
silencer
Fit
a new
air
filter
element.
Automatic choke
Check the
air
flow
through the choke stove
pipe
and
check for correct operation;
rectify
if
necessary.
Carburetters
Clean the
air
valves_ Remove the
tilter
cover from
each cc1rburetter fuel
filter
housing and
fit
a new
paper
filter
element.
Top~p
lhe
oil
level
in
the
air
valve
dampers. Check the
float
chamber depression
and
rectify
if
necessary. Check the
idle
speed and
rectify
if
necessary. Check the choke fa.st-idle
speed and reel i
fy
if
necessary.
Carburetter mixture weakening
device
Fit
a new
air
filter
element.
Crankcase emission control system
Remove and clean the gauze flame traps
in
the
crankcase breather tube. Clean the adapter
in
the
choke
butterfly
housing.
E17 - 3
To Next Page
Loading...
