C:
@
31
000 miles (50
000
km.)
or
2%
years
service whichever
is
the earlier
Essential Maintenance
Engine
Change the engine
oil.
Fit
a new
oil
filter.
Battery
Chack the
level
of
the
electrolyte
and
if
necessary,
top"1p
with
disti
lied
water.
Belt tension
Check the tension
of
all
driving
belts,
reset
if
necessary.
Brakes
Inspect the footbrake and parking brake
pad
I inings;
fit
new
linings
if
necessary.
When
changing the
footbrake pads examine the
condition
of
the dust
excluders
on
the
calipers;
renew
if
necessary.
Manually
adjust
the parking brake pads.
Inspect al I brake pipes and connections: the
Dealer should report any defects to the O~ner.
Fluid levels
Check
all
fluid
levels
and correct asnecessary.
Preventive Maintenance
Carburetters
Top-<..1p
the oil level in the
air
valve
dampers.
Control linkages
Apply a few drops
of
engine
oil
to the accelerator
linkage and to the gear range selector controls
adjacent to the transmission casing.
E lectri
ca
I system
Check
al
I
interior
lamps,
exterior
lamps,
instruments, warning lamps and
devices
for correct
operation;
rectify
if
necessary.
Parking brake linkage
Lubricate
the
pivot
pins
and
pulleys
in the parking
brake system
with
approved grease.
Tyres
Check the tread depth
of
all
tyres, inspect al I tyres
for signs
of
damage. Check the tyre pressures when
they are
cold
and
adjust
if
necessary.
Note
Include the spare tyre.
Test
Road test the car for
satisfactory
performance.
37 500 miles (60 000 km.) or 3 years service
whichever
is
the earlier
Essential Maintenance
Air
injection
pump
Check the
belt
tension and reset
if
necessary.
Air
silencer
Fit
a new
air
fi I ter element.
Carburetters
Top"1p the
oil
level
in
the
air
valve
dampers. Check
the f I oat chamber depress ion and
rectify
if
necessary. Check the
idle
speed and
rectify
if
necessary. Check the choke
fast-idle
speed and
rec! i fy
if
necessary.
Crankcase emission control system
Clean the gauze flame traps
in
the crankcase
breather tube. Clean the adapter
in
the choke
butterfly
housing.
Engine
Change the engine
oil.
Fit
a new
oil
filter.
Exhaust manifolds
Check the torque
tightness
of
the exhaust
manifold
bolts.
Fuel evaporative emission control system
Check the condition
of
the p.ipes and connections;
rectify
if
necessary.
Ignition system
Fil
new sparking plugs ensuring that the gaps are
correctly
set.
Lubricale
the
distributor
spindle
(shaft bearings) and automatic advance mechanism
with
engine
oil.
Check the
ignition
timing
and
reset
if
necessary.
Battery
Check the level
of
the
electrolyte
and
if
necessary,
top-up
with
disti
I led water.
Belt tension
Check the tension
of
all
driving
belts
and reset
if
necessary.
Brakes
Inspect the footbrake and parking brake pad
linings;
fit
new
linings
if
necessary.
When
changing
footbrake pads examine the
condition
of
the
dust
excluders
on
the
calipers;
renew
if
necessary.
Manually
adjust
the parking brake pads.
Inspect a
11
brake
pipes
and connections; the
Dealer
should report any
defects
to the Owner.
Fluid
levels
Check
all
fluid
levels
and correct as necessary.
Front suspension
Inspect the
front
suspension ball
joint
rubber
covers,
if
the covers are found to
be
damaged,
fit
new
joints
and
covers.
S'teering ball joints
Lubricate
the four grease
nipples.
lnspecl
lhe rubber covers
on
the
ball
joints,
if
tt1e
covers are found to be damaged, the
joints
should
be
dismantled and new parts
fitted
if
necessary.
E18
-7
To Next Page
Loading...
