EasyManua.ls Logo

Rolls-Royce Phantom VI - Page 211

Rolls-Royce Phantom VI
223 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
,,
c::
"'
~
w
c::
Battery
Check the level
of
the
electrolyte
and
if
necessary,
top-up
with
di
sti
I led water.
Brakes
Inspect the footbrake and parking brake
pad
linings;
fit
new
linings
if
necessary.
When
changing the
footbrake pads examine the condition
of
the
dust
excluders
on
the calipers; renew
if
necessary.
Manually
adjust
the parking brake pads.
Inspect
all
brake pipes and connections, the
Dea
I er
shou
Id report any defects
to
the Owner.
Oriving
belts
Check the condition
and
tension
of
al 1
driving
belts;
replace damaged or worn
belts
and
adjust
th~
tension
as
necessary.
Fluid
levels
Check a II
fluid
levels
and
correct as necessary.
Front suspension
Inspect the front suspension bal I
joint
rubber covers;
if
the covers are found to
be
damaged
fit
new
joints
and covers.
Steering
ball
joints
Lubricate the four grease nipples.
Inspect the rubber covers
on
the ball
joints,
if
the covers are found to
be
damaged, the
joints
should
be
dismantled
and
new parts
fitted
if
necessary.
Steering rack and pinion assembly
Check the c I
ips
fitted
to
the convoluted neoprene
sea
Is
for
tightness.
Inspect the convoluted neoprene seals
for
damage;-fit new seals
if
necessary.
Torque converter transmission
Change the transmission fluid.
Preventive
Maintenance
Control linkages
Apply
a few drops
of
engine oi I to the accelerator
I inkage
and
to
the gear range selector controls
adjacent to the transmission casing.
Electrical system
Check a
11
interior
lamos, exterior lamps,
instruments, warning lamps
and
devices for correct
operation;
rectify
if
necessary.
Ignition system
Lubricate the
distributor
spindle {shaft bearings}
and automatic advance mechanism
with
engine
oil.
Check the
ignition
timing
and reset
if
necessary.
Check
for
correct operation
of
the vacuum
advance/
retard mechanism.
Parking brake linkage
Lubricate the
pivot
pins and
pulleys
in the parking
brake system
with
approved grease.
Spare wheel carrier
Lubricate the spare wheel carrier lowering
bolt
and
mechanism.
Tyres
Check the tread depth
of
all
tyres, inspect
all
tyres
for signs
of
damage. Check the tyre pressures when
they are
cold
and adjust
if
necessary.
Note
Include the spare
tyre.
Test
Road
test
the car for
satisfactory
performance
43
500
mites
(70
000
km.)
or
3~
years
service
whichever
is
the
earlier
Essential
Maintenance
Engine
Change the engine
oil.
Fit
a new
oil
filter.
Battery
Check the level
of
the electroyte and
if
necessary
top-up
with
disti
I led water.
Brakes
Inspect the footbrake and parking brake
pad
linings;
fit
new
linings
if
necessary.
When
changing the
footbrake pads examine the condition
of
the
dust
exc luders
on
the
ca
I ipers; renew
if
necessary.
Manually
adjust
the parking brake pads.
Inspect
all
brake pipes
and
connections; the
Dealer shou Id report any defects
to
the Owner.
Driving
belts
Check the condition
and
tension
of
al I
driving
belts;
replace damaged
or
worn
belts
and
adjust
the
tension as necessary.
Fluid
levels
Check
all
fluid
levels
and
correct as necessary.
Preventive
Maintenance
Control linkages
Apply
a few drops
of
engine
oil
to
the accelerator
linkage
and
to
the gear range selector controls
adjacent
to
the transmission casing.
Electrical system
Check
all
interior
lamps,
exterior
lamps,
instruments, warning lamps and devices
for
correct
operation;
rectify
if
necessary.
Parking brake
linkage
lubricate
the
pivot
pins
and
pulleys
in the parking
brake system
with
approved grease.
E24
- 7

Related product manuals