Do you have a question about the Rolls PM55P and is the answer not in the manual?
Lists the items included with the PM55P, such as the unit itself, power supply, and owner's manual.
Details the PM55P's electrical and physical characteristics, including input/output levels, impedance, and dimensions.
Explains the XLR mic input, MIC THRU, and the MIC INPUT LEVEL switch for mic or line level.
Describes the 1/4" TRS monitor input jack and its stereo/mono switching capability.
Details the 1/4" and 1/8" stereo headphone output jacks.
Covers the MIC LEVEL, MONITOR LEVEL, and LIMITER switch functions for audio control and signal management.
Lists the items included with the PM55P, such as the unit itself, power supply, and owner's manual.
Details the PM55P's electrical and physical characteristics, including input/output levels, impedance, and dimensions.
Explains the XLR mic input, MIC THRU, and the MIC INPUT LEVEL switch for mic or line level.
Describes the 1/4" TRS monitor input jack and its stereo/mono switching capability.
Details the 1/4" and 1/8" stereo headphone output jacks.
Covers the MIC LEVEL, MONITOR LEVEL, and LIMITER switch functions for audio control and signal management.
| Type | Power Amplifier |
|---|---|
| Total Harmonic Distortion (THD) | < 0.1% |
| Input Impedance | 10 kΩ |
| Signal-to-Noise Ratio | > 90 dB |
| Inputs | XLR, 1/4" TRS |
| Frequency Response | 20 Hz - 20 kHz |
| Outputs | Binding Posts |
| Damping Factor | > 200 |
| Dimensions | 19" x 1.75" x 8.5" |
| Output Power | 55 Watts per channel |
Loading...