Be sure to note which product you are using
and follow the instructions that apply to that
product. Unless otherwise stated, these
instructions apply to all of the products listed.
INDICATIONS
• To support a subluxed shoulder
CONTRAINDICATIONS
• Not in the presence of a fracture
PRECAUTIONS
• These products are to be fitted initially by a
healthcare professional who is familiar with
the purpose for which they are prescribed.
The healthcare professional is responsible
for providing wearing instructions
and precautions to other healthcare
practitioners, care providers involved in the
patient’s care, and the patient.
• If unusual swelling, skin discoloration
or discomfort occurs, use should be
discontinued and a healthcare professional
consulted.
• Be careful that the sling and straps are not
so tight that they interfere with circulation.
CARE AND CLEANING
Rolyan Original Hemi Arm Sling
Rolyan Hemi Arm Sling Cuff Adapter
Fasten hook-and-loop closures. Hand wash
with lukewarm water and mild soap. Wrap in
towel to remove excess moisture and air dry.
Be sure sling and cuff adapter are thoroughly
dry before reapplication.
Rolyan Hemi Arm Sling II & Custom
Fasten hook-and-loop closures. Machine
wash in warm water and machine dry. Be sure
sling is thoroughly dry before reapplication.
APPLICATION
Instructions for one-handed application and
removing sling are on center page—they can
be given to patient.
Rolyan Original Hemi Arm Sling
Rolyan Hemi Arm Sling II, Rolyan Custom
Hemi Arm Sling
1. Open hook-and-loop closures on arm cuff
and chest strap (strap that is not attached to
O-ring). Adjust the three remaining straps to
their longest length.
2. With loose chest strap toward front of body
and O-ring toward back, put unaffected
arm through loop that has plastic strap
protector and pull strap protector into
underarm area (A).
3. Bring arm cuff across back and place over
distal aspect of biceps (B). Secure hook-
and-loop closure. The O-ring should not
be centered on back—it should lie toward
unaffected arm (C).
4. Adjust length of strap around unaffected
shoulder so strap is snug.
5. Fasten chest strap (D).
6.
Adjust posterior strap and strap across clavicle
to provide desired positioning of humerus.
7. After strap length and arm cuff circumference
are determined, mark straps and cuff to
indicate proper length for future application.
Rolyan Hemi Arm Sling Cuff Adapter
8. With D-ring toward outside of arm, secure cuff
adapter around forearm and wrist.
9. Attach distal strap through thumb web space.
10. Thread proximal strap through D-ring on
cuff adapter and through D-ring on sling on
unaffected shoulder (E).
11. Adjust length of strap for desired elevation.
Rolyan
®
Original Hemi Arm Sling: Rolyan Custom Hemi Arm Slings
A653-LS, RS, LM, RM, LML, RML, LL, RL, LXL, and RXL 5598-64-01 through 5598-64-06 Cuffs
Rolyan
®
Hemi Arm Sling II:
5598-64-07 through 5598-64-12 Straps
A653-1 through A653-10
Rolyan
®
Hemi Arm Sling Cuff Adapter:
A653-CA and A653-11
1
A B
DC
E
To Next Page
Need help?
General