Need help?Do you have a question about the Roma R-1000 and is the answer not in the manual?
General| Brand | Roma |
|---|---|
| Model | R-1000 |
| Category | Control Panel |
| Language | English |
Warning: Ensure all electrical current is turned off before removing the top cover on the steam generator.
Warning: Do not install any valve or obstruction within the steam supply line.
Illustrates the typical installation and wiring connections for the R-1000 steam generator system.
Guidance on locating and mounting the power unit, noting cable length limitations for keypad and thermostat.
Instructions for recessing the keypad into a shower wall and securing it to a gang box.
Details on drilling, positioning, and grouting the temperature probe for accurate room sensing.
Instructions for connecting the keypad and temperature probe cables to the power unit.
Step-by-step guide for wiring the 120VAC input/output to terminal blocks and connecting ground wires.
Explanation of the R-1000 Digital Command Center controls and display functions.
Details on using the 'Time' key to activate the generator, set bath duration, and view status.
How to use the 'Up' and 'Down' arrow keys to adjust the desired temperature set point.
Functions of the 'Off' key for system shutdown and the 'Heat' indicator status.
To Next Page