STEP D
Take the footboard of your crib (FB) as resulted after
completing STEP C and carefully place it back over the
rest of the crib. Using 4 bigger Allen bolts (4), 4
washers (10) the and the Allen wrench supplied (1), fix
footboard (FB) to the right and left panels (RP) & (LP).
Now, you must completely tighten all 4 Allen bolts
remains not tightened from all previous steps.
REMINDER
You have to completely tighten a total of 4 bolts,
distributed as following:
- 4 bigger Allen bolts (4+10) in the footboard (FB);
STEP E (Two adults are required to complete this
step)
Turn the resulted daybed with its feet back on the floor.
After completing assembly, your daybed should look
like the one depicted on the first page of this section.
FIGURE D
WARNING!
COMPLETELY TIGHTEN!
WARNING: TO KEEP
YOUR BABY SECURE AND
SAFE, AND TO AVOID
POTENTIAL INJURY OR
D E AT H , I T ' S V E R Y
I M P O R T A N T T O
COMPLETELY TIGHTEN
ALL 4 BOLTS LISTED IN
STEP D.
REQUIRED
4+10
4+10
4+10
4+10
NOTE: THE STYLE OF YOUR
CRIB, HEADBOARD OR OF
YOUR MATTRESS SUPPORT
MAY VARY FROM WHAT IS
P I C T U R E D I N T H E
INSTRUCTION SHEET
To Next Page
Loading...
