Please locate and confirm that
you have the following parts:
HB. headboard = 1
FB. footboard = 1
LP. left panel = 1
RP. right panel = 1
SB. stabilizing bar = 2
MS. mattress support = 1
WR. wooden rail = 1
WB. wooden block = 2
one bag of hardware with the following:
1. Allen wrench = 1
2. one storage pouch and two plastic ties
3. Allen bolt (50 mm - 1 31/32") = 4
4. Allen bolt (60 mm - 2 1/4") = 8
5. rounded head bolt (30 mm - 1 3/16") = 4
6. rounded head bolt (15 mm - 19/32") = 4
7. "butterfly" type nut = 4
8. screw-in dowel = 2
9. cam fitting = 2
10. bigger “internal star” lock washer = 12
11. smaller “external star” lock washer = 8
12. wood screw (20mm - 3/4”) = 3
Required tools: Allen wrench (supplied), Phillips
screwdriver (not included), flat screwdriver (not
included).
CAUTION: Do not use a power screwdriver which
can cause screws to break or strip
Note: During the assembly process whenever using screws or bolts, check
each by placing the screw / bolt on the upper diagram which is drawn in actual
size. Be sure to use the proper size and shape specified in the instructions.
Be sure to COMPLETELY TIGHTEN the screws / bolts when you are asked to do this.
Phillips screwdriver (not included)
N o t e :
T h e i t e m
number of your
product is located on
the inner side of the left
panel, on a black and white
label. Please, refer to this number in
the event that you need to call ROMINA
FURNITURE or your local distributor. Thank
you.
Note: The letters which
identifies a part are the
initials of the respective
part name (such method
is employed to facilitate
parts recognition
between the drawings
and the parts list).
1
7
8
9
MS
SB
RP
LP
FB
HB
2
WR
WB
12
10
11
printed in full size
3
4
11
10
7
5
6
8
9
NOTE: THE STYLE OF YOUR
CRIB, HEADBOARD OR OF
YOUR MATTRESS SUPPORT
MAY VARY FROM WHAT IS
P I C T U R E D I N T H E
INSTRUCTION SHEET
To Next Page
Loading...
