Rommelsbacher MD 1000

Questions and Answers

D
Dale PhelpsAug 17, 2025
Why is my Rommelsbacher MD 1000 Electric Pressure Cooker leaking water or steam?
- B
  Barbara SpencerAug 17, 2025
  If water or steam leaks from your Rommelsbacher Electric Pressure Cooker during cooking, several components may be at fault. First, examine the gasket ring to ensure it's correctly placed, undamaged, and clean. Also, check for any debris on the bayonet lock of the lid and the pressure pot; clean if necessary. Next, inspect the steam outlet valve, ensuring the black and protective caps are correctly positioned. If the issue persists, clean the valve with a wooden toothpick. Finally, check the pressure valve for lid locking for damage or soilings at the sealing cap or valve bottom. Replace or clean as needed.
M
Mr. Randall WhiteAug 20, 2025
What to do if my Rommelsbacher MD 1000 Electric Pressure Cooker dishes are only half-done?
- N
  nancynealAug 20, 2025
  If your dishes are undercooked in the Rommelsbacher Electric Pressure Cooker, consider these factors: Reduce the filling quantity inside the pot. Adjust the ratio of ingredients to water. Ensure the cooking pot sits correctly on the heating plate and is not deformed. Check the gasket ring for damage that may cause insufficient steam pressure. Also, try increasing the cooking time.
A
Amber SmithAug 23, 2025
Why are my dishes overcooked in the Rommelsbacher MD 1000 Electric Pressure Cooker?
- A
  Andrew DuranAug 23, 2025
  If your dishes are overcooked when using the Rommelsbacher Electric Pressure Cooker, the cooking time may be too long. Reduce the cooking time, consulting the cooking table for guidance. Also, the steam pressure might be too high; try using a lower steam pressure level. Finally, ensure that the dishes are suitable for pressure cooking.
P
pdavidsonAug 26, 2025
What to do if my Rommelsbacher MD 1000 Electric Pressure Cooker does not heat up?
- R
  Robert ClarkAug 26, 2025
  If your Rommelsbacher Electric Pressure Cooker isn't heating up, first ensure it's correctly connected to the power supply. If it still doesn't heat up, contact your service point, as the heating plate may be defective.
J
Jason BeckAug 28, 2025
Why aren't the LEDs lighting up on my Rommelsbacher MD 1000?
- L
  Leah WilliamsAug 28, 2025
  If the LEDs on your Rommelsbacher Electric Pressure Cooker aren't lighting up, check that the power cord is properly connected to both the appliance and the power socket. Test the power socket with another appliance to ensure it functions. Also, ensure the pressure cooker is assembled correctly.
L
Lucas BonillaAug 31, 2025
How to release steam from Rommelsbacher Electric Pressure Cooker if the valve is blocked?
- L
  lisa42Aug 31, 2025
  If steam cannot be released by the steam outlet valve of your Rommelsbacher Electric Pressure Cooker, try pressing the button for the steam outlet valve several times to loosen any blockings. If that doesn't work, you can release pressure manually by letting the appliance cool down (which will reduce pressure automatically, but may take some time). Alternatively, wearing a heat-resistant glove, carefully lift the cap of the steam outlet valve at an angle using a long object to release any remaining pressure.
T
Tammy NavarroSep 3, 2025
What to do if the lid of my Rommelsbacher Electric Pressure Cooker is stuck?
- C
  Christopher HarringtonSep 3, 2025
  If the lid of your Rommelsbacher Electric Pressure Cooker is difficult to open or cannot be opened, there is likely still steam pressure inside the appliance. Release the steam by pressing the button for the steam outlet valve.
M
Matthew HughesSep 5, 2025
Why is the lid of my Rommelsbacher MD 1000 hard to close?
- D
  Daniel Thomas DDSSep 6, 2025
  If the lid of your Rommelsbacher Electric Pressure Cooker is difficult to close, ensure the gasket ring is properly inserted; readjust it if necessary. Also, check if the safety bolt of the lid lock is blocked; try loosening it by moving it back and forth.
M
Matthew HuangSep 8, 2025
What does 'AUF' or 'ZU' mean on my Rommelsbacher MD 1000 Electric Pressure Cooker display?
- M
  Martha MartinezSep 8, 2025
  If your Rommelsbacher Electric Pressure Cooker displays “AUF” (open) or “ZU” (closed), it means the lid is not positioned correctly. Close the lid properly by turning it clockwise until it stops.
L
Linda LeeSep 12, 2025
What does 'EC' mean on the display of my Rommelsbacher MD 1000 Electric Pressure Cooker?
- K
  Karen HarveySep 12, 2025
  If your Rommelsbacher Electric Pressure Cooker displays “EC“, the selected program is not suitable for cooking with the lid on. Remove the lid.