MOISTURE MEASURING (FIGURE SCALE)
2 - IN WOOD
Stick the 2 points in the wood.
This time, disregard the three-coloured scale, and use only the
figures.
N.B. the figure 28% corresponds to saturation of wood fibres.
Tolerated water content for:
• Frame 18 to 22 %
• Outside carpentry 17 to 18 %
• Inside carpentry 14 %
• Parquet floor 13 to 14 %
• Woodwork 6 to 12 %
Réf. 93251 - SURFACE CAPTOR
To measure humidity contained in furniture or support covered with
fragile materials.
Réf. 93252 - PROBES 25 cm.
For deep measures. Drill 10 cm and test moisture.
OPTIONNAL ACCESSORIES
Battery must be changed if the light control do not show up or if it
fliks.
CHANGE BATTERY
To Next Page
Loading...
