Need help?Do you have a question about the Rondar K6 and is the answer not in the manual?
Key advice for new owners regarding boat care and checks before sailing.
Official declaration of the craft's compliance with relevant EU directives.
Details standards applied for the Recreational Craft Directive requirements.
Certificate detailing specifications for the road trailer and trolley.
Step-by-step guide for raising and securing the mast onto the boat.
Instructions for attaching and preparing the jib sail for use.
Guidance on adjusting rig tension, rake, and pre-bend for optimal performance.
Detailed procedure for setting up the asymmetric spinnaker.
Steps for attaching and tensioning the mainsail.
Information on the rudder blade and its integration with the boat.
Procedures and options for safely launching the K6 boat.
Advice for initial sailing experiences, including boat preparation and safety.
Guidance on keel usage during sailing, launch, and recovery.
How to adjust the tack downhaul for sail shape and mast bend.
Advice on using the kicker for leech tension and sail control.
Tips for adjusting jib sheets and using barber haulers for optimal trim.
Techniques for efficient tacking with a self-tacking jib.
Instructions for hoisting the spinnaker, involving helm and crew coordination.
Best practices for executing a gybe safely and efficiently.
Procedure for dropping the spinnaker while sailing downwind.
Specific advice for sailing the K6 downwind in breezy conditions.
Maintenance and care instructions for the boat's hull structure.
Categorization and repair advice for different types of hull damage.
Proper methods for securing the boat to its trailer to prevent damage.
Care and maintenance recommendations for the boat's foils.
Troubleshooting and methods to reduce foil vibration noise.
Maintenance guidelines for the mast, boom, and bowsprit.
Advice on storing, cleaning, and repairing sails.
Information on joining the UK Class Association and its benefits.
Details about the International K6 Association and its website.
Overview of terms and conditions for accepting orders and contracts.
Limitations on the company's liability regarding manufacture and transport.
Company's right to alter specifications, designs, and component parts.
Details on pricing, payment terms, deposits, and credit policies.
To Next Page
General