Rongta Technology RP310 - Safety Instructions

Il. Safety Instructions
Before operating and using the printer, please carefully read the
following items and strictly observe the use rules.
@ Please install the printer on a stable surface to avoid printer suffered from any
vibration and shocks.
@ Do not use and store the printer in places with high temperature, high humidity
and high pollution.
© Connect the printer's power adapter to an appropriate grounding socket. Avoid
using the same socket with large motors or other equipment that may cause
voltage fluctuation of power supply.
@ Keep water or conductive materials (such as metal) out of the printer. Once it
occurs, Power should be turned off immediately.
© Never use the printer without paper, otherwise it will seriously damage the
printing rubber roller and thermal head.
® Unplug the product from the power outlet if the printer is idle for a long time.
@ Do notdisassemble or modify the product personally.
@ Use only the power adapter specified in this instruction.
@ Inorder to ensure the printing quality and prolong the service life of the product,
it is recommended to use the recommended or equivalent thermal printing paper.
@ Do not plug/unplug the product with the product powered on.
When plugging and unplugging the printer power cord, please hold the arrow
position of the printer power connector with your hand, not the cord of the
printer power cord.
@ Please keep this manual for the future use and reference.