Do you have a question about the Ronin X Series and is the answer not in the manual?
LED | CREE LED |
---|---|
Battery Type | 18650 |
Modes | High, Medium, Low, Strobe, SOS |
Weight | 150g (without battery) |
Water Resistance | IPX8 (submersible up to 2 meters) |
Attach and adjust the hip-mounted battery holster for comfort and accessibility. Ensure proper fit.
Position the head-mounted luminaire between the eyes and adjust the headband for a snug, comfortable fit.
Connect the keyed cable connector to the battery holster socket, turning gently to engage without forcing.
Use only authorized Ronin battery models. Contact support for an updated list of approved batteries.
Load the battery into the holster with the terminal oriented towards the hip. Avoid forcing to prevent damage.
Turn on the LED via the holster switch and select desired intensity using the dimming knob.
Adjust luminaire angle and position for coaxial light. Modify spot diameter using the lens adjustment knob.