EasyManua.ls Logo

Rontan IS2100-M Generation 2 - Page 2

Rontan IS2100-M Generation 2
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IS2100-M Generation 2
Installation, Program & Operation Manual
www.rontan.com.br REV 1 Page
2
Security Message
WARNING
Before beginning installation of your device, it is important to read these instructions for the
safe/correct installation and operation of this product.
Proper installation of this product requires the installer have good understanding of automotive
electrical systems and procedures.
It is the user's responsibility to proceed safely on the use of hearing protection Equipment
DO NOT route any wires in the deployment path of your airbag. Please refer to the vehicle owner´s
manual for the airbag deployment area.
DO NOT drill any holes into this device.
If it’s necessary to perform a battery charge with an auxiliary car battery, it’s highly recommended to
disconnect the power supply of this product to avoid a voltage surge that may damage it and the
electrical system of the vehicle.
DO NOT jumpstart the vehicle with the battery connected to the siren and light bar system. Auxiliary
lights and sirens are intended for use by authorized personnel only.
The users have the responsibility to ensure they operate the emergency warning devices in
compliance with the applicable laws and regulations.
File these instructions in a safe place and refer to them when performing maintenance and/or
reinstallation of this product.
Failure to follow all safety precautions can result in damage to the product and vehicle or
serious injury to individuals!