Room & Board Berkeley Storage Bed

To Next Page

WE'RE HERE TO HELP800.301.9720

Berkeley Storage Bed Assembly

Instructions

List of parts:

1 headboard

1 footboard

2 side rails

2 drawers

10 steel slats (Twin/Full); 12 steel slats (Queen/King/California King)

4 threaded rods

4 nuts

4 curved washers

8 dowels

4 Allen bolts

Tools needed:

Allen wrench (included)

Small wrench (included)

Directions:

1. Position headboard upright, near desired placement location.

2. With front of headboard facing you, screw threaded rods into inserts, located on the legs of the headboard.

(Figure 1)

3. Place dowels in pre-drilled holes. Align dowels and rod with holes on side rail and push together. (Figure 2)

4. Slide curved washer and nut on threaded rod and tighten with small wrench. (Figure 3)

5. Repeat steps 2 through 4 for second side rail.

6. Repeat steps 2 through 4 for footboard.

7. Remove drawers from drawer frame and move drawer frame inside the bed frame, near the footboard.

8. Make sure locking pins for drawer frame are attached to the footboard. These will be used to attach the drawer

frame.

9. Connect the front using cam connectors. Line up cam holes and slide it into the footboard.

10. Turn cam locks with Allen wrench until snug.

11. Insert the drawer frame by connecting it to the side rails using the flat head Allen screws.

12. Reinsert the drawer frame into the bed frame. The left drawer has an overhang on the left side; right drawer has

an overhang on the right side. The ball bearings should face forward even though the slide is closed.

13. Place slats on side rails, matching the slots in each slat to the rivet on the side rails.

14. Place mattress on slats.

Need help?

Do you have a question about the Room & Board Berkeley Storage Bed and is the answer not in the manual?

The provided document is an assembly instruction manual for the "Berkeley Storage Bed" from Room&Board. This manual details the steps required to assemble the bed frame, including its integrated storage drawers.

Function Description

The Berkeley Storage Bed is a piece of furniture designed for sleeping, featuring an integrated storage system. Its primary function is to provide a comfortable sleeping surface while maximizing space utilization through built-in drawers. The bed frame supports a mattress and is constructed to be sturdy and durable. The storage component, consisting of two drawers, is designed to slide smoothly within the bed frame, offering convenient access to stored items. The assembly process involves connecting the headboard, footboard, and side rails using a combination of threaded rods, nuts, dowels, and Allen bolts, creating a robust structure. The slat system provides support for the mattress, ensuring proper weight distribution and ventilation.

Important Technical Specifications

List of Parts:

1 headboard: The top section of the bed, providing back support and often a decorative element.
1 footboard: The bottom section of the bed, opposite the headboard.
2 side rails: The long structural components connecting the headboard and footboard, supporting the mattress slats.
2 drawers: Integrated storage units designed to slide under the bed.
10 steel slats (Twin/Full): Horizontal supports for the mattress, used for Twin and Full-sized beds.
12 steel slats (Queen/King/California King): Horizontal supports for the mattress, used for Queen, King, and California King-sized beds.
4 threaded rods: Metal rods with threads, used for securing components.
4 nuts: Fasteners that screw onto threaded rods.
4 curved washers: Washers with a curved surface, used to distribute the load of a fastener.
8 dowels: Cylindrical wooden pins used for alignment and reinforcement in joints.
4 Allen bolts: Bolts with a hexagonal socket in the head, tightened with an Allen wrench.

Tools Needed (Included):

Allen wrench: Used to tighten Allen bolts and turn cam locks.
Small wrench: Used to tighten nuts.

The bed frame utilizes a combination of mechanical fasteners (threaded rods, nuts, Allen bolts) and alignment aids (dowels) to ensure a secure and stable assembly. The steel slats provide robust support for the mattress, with the number of slats varying based on bed size to accommodate different mattress dimensions and weights. The drawer system incorporates ball bearings for smooth operation, indicating a focus on user convenience and durability.

Usage Features

The Berkeley Storage Bed offers several usage features designed for convenience and functionality:

Integrated Storage: The primary usage feature is the two built-in drawers, which provide discreet and accessible storage space under the bed. This is particularly beneficial for smaller living spaces where maximizing storage is crucial.
Easy Assembly: The instructions suggest a straightforward assembly process, with all necessary tools (Allen wrench and small wrench) included. The step-by-step guide, complemented by figures (though not provided in the text, their mention implies visual aids), aims to make the setup manageable for the user.
Sturdy Construction: The use of steel slats, threaded rods, and Allen bolts indicates a design intended for stability and long-term use. The dowels aid in precise alignment, contributing to the overall structural integrity.
Mattress Support: The steel slats are designed to support a mattress directly, eliminating the need for a box spring in most cases. This simplifies the bedding setup and can contribute to a lower profile for the bed.
Smooth Drawer Operation: The mention of ball bearings for the drawers suggests that they are designed to slide in and out smoothly and quietly, enhancing the user experience. The specific instruction regarding the left and right drawer overhangs and the forward-facing ball bearings indicates attention to detail in the drawer mechanism.

Maintenance Features

While the manual primarily focuses on assembly, some aspects imply maintenance considerations:

Durable Materials: The use of steel for slats and robust fasteners suggests a design that requires minimal ongoing maintenance for structural integrity. Steel is known for its durability and resistance to wear.
Tightening Fasteners: The assembly process involves tightening nuts and Allen bolts. Over time, it may be beneficial to periodically check and re-tighten these fasteners to ensure the bed remains stable and secure, preventing creaks or wobbles. This is a common maintenance practice for furniture assembled with mechanical fasteners.
Drawer Mechanism Care: The ball bearing slides for the drawers are generally low-maintenance. However, keeping the tracks free of dust and debris can help maintain smooth operation. If the drawers become stiff, a light application of a suitable lubricant (e.g., silicone spray) might be considered, though this is not explicitly stated in the instructions.
Cleaning: As with most furniture, regular cleaning of the headboard, footboard, and side rails (likely wood or a similar material, given the images implied by "Figure 1," "Figure 2," "Figure 3") with appropriate cleaning products will help maintain its appearance. The steel slats would generally require minimal cleaning, perhaps just dusting.
Disassembly and Reassembly: The detailed assembly instructions imply that the bed can be disassembled if needed for moving or storage. This feature, while not strictly maintenance, allows for the bed to be maintained in a modular fashion, facilitating relocation without permanent damage. The use of standard tools (Allen wrench, small wrench) makes this process accessible.

In summary, the Berkeley Storage Bed is a functional and space-saving furniture piece designed for ease of assembly and durable use, with integrated storage as a key benefit. Its construction and components suggest a focus on stability and user convenience, with standard furniture maintenance practices applicable to ensure its longevity.