RoomAndLoft Murphy - Page 14

TT
TOP TRAY
K153 bayonet
connector
bars
Insert K105B bolts with K106
fender washers, but leave them
loose so there is some “play”
K161B Wrench
K105B Bolt
K106 Fender washer
TT
TOP TRAY
K153 bayonet connector bar
from boxes #3& #4
K161B Wrench
K106 Fender washer
K105B Bolt
WOOD TRAY FACE
Insert bayonets with the short “leg”
oriented up as shown
K153 bayonet
connector
bars
(FROM BUBBLE PACK #3)
Welded Nut
Connecting the Top Tray (TT) to the Bottom Tray (BT).
Step 1: Insert the K153 Bayonet ABOUT HALFWAY into the TT tray as shown below – with the short leg of the “L” shape “up” as in the
drawing at the bottom left of this page - then hand start the bolts and leave them loose for now.
13
SEE FROME TOP SIDE