RoomAndLoft Murphy - Page 16

STEP 1
Install 4 K105B bolt
+4 K106 washer
and tighten fully
STEP2
Fully tighten all 6
bayonet bolts
K105B bolt
K106 washer
K161B
Connecting all the Supports to build a strong frame
Step 1: Use 4 K015B Bolts with 4 K106 Washers, and the K161B wrench to tightly connect the lateral-center frames of TT to BT.
Step 2: Now go back and fully tighten the 6 bolts that we left loosely connected through the bayonets on the previous page.
15