The provided manual describes a Root Industries Type R Complete Scooter, a two-wheeled, non-motorized vehicle designed for recreational riding and stunt performance.

Function Description

The Root Industries Type R Complete Scooter is engineered to provide a stable and responsive platform for riders. Its primary function is to enable personal transportation and the execution of various freestyle scooter tricks. The scooter is comprised of several key components that work in conjunction to facilitate its operation:

Bars (Handlebars) and Hand Grips: These provide the rider with control over steering and balance. The grips are designed for comfort and to prevent hands from slipping during use.
Clamp: This component securely fastens the handlebars to the fork, ensuring a rigid connection for steering and control.
Deck: The main platform where the rider stands, providing stability and space for foot placement.
Fork: Connects the front wheel to the handlebars and deck, allowing for steering.
Wheels: Equipped with bearings, these allow the scooter to roll smoothly across surfaces.
Brake: Located at the rear, the brake allows the rider to slow down or stop the scooter.
Grip Tape: Applied to the top surface of the deck, it provides traction for the rider's feet, preventing slippage.
Compression System (HIC/IHC/SCS): This internal system ensures that the fork, headset, and handlebars are held together tightly, eliminating wobble and improving overall stability and responsiveness.
Headset: A set of bearings that allows the fork to rotate smoothly within the head tube of the deck, enabling steering.

The scooter is intended for use on smooth, paved, flat, clean, and dry surfaces, free from loose debris. It is not designed for use in wet conditions, mud, ice, or on rough, uneven terrain, as these can impair traction and increase the risk of accidents. The design emphasizes durability and performance, catering to riders who may engage in high-stress activities like stunt riding, though it acknowledges that such use can lead to damage.

Usage Features

The Root Industries Type R Complete Scooter offers several features that enhance its usability and rider experience:

Pre-tightened Components: At the factory level, the bolt at the top of the forks is pre-tightened, simplifying initial setup for the user. However, users are advised to check this during assembly.
Easy Assembly: The scooter is designed for straightforward assembly, primarily requiring the handlebars to be slid onto the fork tube and secured with the provided 6mm Allen key. Clear instructions are given for aligning the bars and tightening the bolts.
Responsive Steering: The combination of the fork, headset, and compression system allows for smooth and precise steering, crucial for both general riding and executing tricks.
Stable Platform: The deck, coupled with grip tape, provides a secure standing surface, contributing to rider confidence and control.
Braking Capability: A rear brake system allows for effective speed control and stopping, enhancing rider safety.
Durability for Performance: While not impervious to damage, the scooter is manufactured with performance and durability in mind, making it suitable for various riding styles, including stunt riding, within reasonable limits.
Weight Capacity: The scooter is designed to support riders up to 220 pounds (100kg), accommodating a wide range of users.
Age Recommendation: It is recommended for children over the age of eight, with adult guidance advised for all children using the product, highlighting its suitability for a younger, active demographic under supervision.

Maintenance Features

To ensure the longevity and safe operation of the Root Industries Type R Complete Scooter, the manual outlines several key maintenance procedures:

Regular Inspection: Users are advised to always inspect their scooter before riding and to maintain it regularly. This includes checking for loose parts, wear, and damage.
Compression System Tightening (HIC/IHC/SCS): If the handlebars begin to shake or move side to side, it indicates that the compression needs tightening. This is done by removing the handlebars, inserting a 6mm Allen key into the top of the fork, and turning it clockwise until pressure is felt. It's crucial not to overtighten to avoid restricting fork movement or damaging the compression/headset. This task is recommended for an adult or professional mechanic.
Bearing Lubrication: To maintain smooth wheel rotation, the wheel bearings require lubrication. This involves removing the wheels using a 6mm Allen key, cleaning any dirt or grime from the wheels and bearings with a damp cloth, and then applying 3-4 drops of bicycle bearing oil directly onto the bearing covers. If wheels do not spin freely after lubrication, bearing replacement may be necessary.
Part Replacement: Worn or broken parts should be replaced immediately to ensure continued safe operation.
Assembly Bolt Tightening: During assembly, all bolts, particularly those securing the handlebars and clamp, must be tightened securely using the provided 6mm Allen key. The manual emphasizes the importance of tightening from the bottom up and repeating the action until all bolts are secure. Failure to properly tighten or install components can lead to loss of control and injury.
Cleaning: Keeping the scooter clean, especially the wheels and bearings, is important for optimal performance and to prevent debris from causing wear or malfunction.

These maintenance steps are crucial for ensuring the scooter remains in good working condition, prolonging its lifespan, and most importantly, ensuring the rider's safety. The manual stresses that proper inspection and maintenance can significantly reduce the risk of injury.

ROOT INDUSTRIES Type-R - Page 18